<<<<<< SOLUTION Lumia 710 / 800 / 800C "NOT FLASHING" after TP BOOT REPAIR >>>>>>

[onchogsm]

Working perfect solution! Thx ATF box!!!

[tracemaker]

big thanks for this solution,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,

[marcosabadia]

Everyone teaches do and undo with Qualcomm, but ningem explains how to find DLOAD driver, and make the jailbrake NOKIA DLOAD. perhaps no one even knows.

[ruku5786]

================================================== ====
================================================== ====
eMMC Test Point Connection Module
================================================== ====
================================================== ====

1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.

ERROR: EMMC WAS NOT Detected! (CMD1)
Check your Test Point Soldering!
CMD1 Reply: 0x5E5E5E5E

BOOT Images Written Successfully!

Total Elapsed Time 00:00:05
what is the problem sir

[high-tech]

1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.


Interface Reset OK!
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 2.7-2.8V, 2.6-2.7V, 2.5-2.6V
2.4-2.5V, 2.3-2.4V, 2.2-2.3V, 2.1-2.2V, 2.0-2.1V
1.9-2.0V

CID : 0600003136FFFFFFFFFF195C4939
CSD : 904F012A0F5903FFF6DBFFEF8A400099

eMMC Boot Information
BOOT PARTITION : USER AREA
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT: DISABLED
PWR_BOOT_CFG_PROT : DISABLED
eMMC FirmW UPDATE : DISABLED

ERROR: EMMC_READ_SINGLE_BLOCK FAILED (CMD17)
Check GREEN Test Point Connection
need help

[tumobi]

i have a lumia 900 ,dont' flash
Sending AMSS Certificate
HASH: 6898A268F71233A06C3082728DB725A38679C21C
Certificate Size: 449 Bytes

ERROR: Data Rejected at SEQ 0x3
Status : WRITE AMSS CERTIFICATE FAILED
help me plz..thanks

[nhumanh]

I got this

20:42:33 : Loading Partition File: E:\AdvanceBox Turbo Flasher\Nokia\Lumia\partitions\dbl_RM-801_RM-819.bin
20:42:33 : Writing Partition 0x4D
20:42:35 : Partition 0x4D Write OK
20:42:35 :
20:42:35 : Total Elapsed Time 00:00:01
20:42:41 :
20:42:41 : Loading Partition File: E:\AdvanceBox Turbo Flasher\Nokia\Lumia\partitions\osbl_nokia_RM-801_RM-819.bin
20:42:41 : Writing Partition 0x46
20:42:41 : Partition 0x46 Write OK
20:42:41 :
20:42:41 : Total Elapsed Time 00:00:00
20:42:46 :
20:42:46 : Loading Partition File: E:\AdvanceBox Turbo Flasher\Nokia\Lumia\partitions\amss_adsp_RM-801_RM-819.bin
20:42:46 : Writing Partition 0x0C
20:42:46 : Partition 0x0C Write OK
20:42:46 :
20:42:46 : Total Elapsed Time 00:00:00
20:43:07 :
20:43:07 : Operation Cancelled...
20:43:28 :
20:43:28 : Loading Partition File: E:\AdvanceBox Turbo Flasher\Nokia\Lumia\partitions\RM801_11501_prod_64 5_02_boot.esco
20:43:28 : Writing Partition 0x48
20:43:29 : Partition 0x48 Write OK
20:43:29 :
20:43:29 : Total Elapsed Time 00:00:00
20:44:13 :
20:44:13 : ERROR: Qualcomm MMC Storage is NOT FOUND

can not revive

[JOTECH]

Sir , i was having problem after i perform testpoint unlock on lumia 710 rm809 whit atf. Everything when on smoothly,after coupling the phone ,try to power it up. It vibrate and shows a blinking nokia logo on the screen. I remove the battery and try to power it up againg but only vibrate, but refuse to boot up. I did boot repair by choosing the right with success response but still not power-up, scan partition, no partition detected. Please sir how do you help me by guide on how to get the phone back to working condition?

[prasadchile]

lumia 710.....try again in 17910216 minutes.....plz help me

[high-tech]

Originally Posted by prasadchile

lumia 710.....try again in 17910216 minutes.....plz help me

Perform a hard reset if problem still exist then flash it, 100%

[mx-key_good]

Originally Posted by Advance-Box

The solution described below is for phones with "un-alligned" or corrupted AMSS + ADSP Region caused by improper custom firmware flashing or by other means of data corruption.

Here is sample logs showing the error during Normal USB Flashing:

================================================== ======
Sending OSBL Certificate HASH: C72DBA3ABED42215584093FA9DE247381D6062B4
Certificate Size: 452 Bytes

ERROR: Data Rejected at SEQ 0x3
Status : WRITE OSBL CERTIFICATE FAILED
==============================================


STEP 1:
In order to fix this problem, you first need to write QUALCOMM OSBL to your phone via TP Method.

Select Correct Phone Type and make sure M.B.R. + SEC_BOOT + OSBL QCOM is selected as well. Then click REPAIR BOOT!!!





STEP 2:
Remove USB Cable and press and hold POWER BUTTON for 18 Seconds. Then press and hold VOLUME UP Button while connecting the USB Cable to the phone.

*** Your Phone should now be detected as a New HDD Device and Windows will ask you to FORMAT IT... Of course

DO NOT FORMAT

STEP 3:
Download the proper RAW BOOT Files for your phone.


Lumia 710 RM-803 and RM-809
Lumia 800 RM-801 and RM-819
Lumia 800C RM-802



STEP 4:
Go to eMMC Direct tab in ATF Software and click "Scan Partitions". If your phone is NOT DETECTED, go back to STEP 2. Repeat Step 2 until your phone is DETECTED Properly.

After ATF Software successfully Lists the Partitions Found on the Phone, click "Backup Phone Data" so you will save your IMEI, Simlocks and other important data safely.





STEP 5:
Now Let us write Boot Files which you downloaded from Step 3.
Extract the RAR file and then write the 3 RAW Boot Files 1 by 1:

5a. dbl_RM-XXX.bin <--- Write this to 0x4D - DBL Partition
5b. osbl_nokia_RM-XXX.bin <--- Write this to 0x46 - OSBL Partition
5c. amss_adsp_RM-XXX.bin <--- Write this to 0x0C - AMSS_ADSP Partition

5a - DBL



5b - OSBL_NOKIA



5c - AMSS_ADSP



STEP 6:
Click "SP UNLOCK" if you want to unlock your phone after fixing the BOOTS.



STEP 7:
Flash the WP_OS partition using your regular ESCO Flash Files. This will have the same effect as you will flash the phone via USB... but via eMMC Direct, it is faster and does not care if your KEYSTORE is damaged or erased.

Write Flash file to 0x48 WP_OS Partition.

Flash File should be the BOOT file and should be more than 300 MB in size.

It looks like this:

RMxxx_11111_prod_111_11_boot.esco <--- 300+ MB









*** WARNING: Everytime you flash your phone with another firmware, you will always RESET the SP Lock status and RESET the SP Lock Counters. To avoid your phone from getting RE-LOCKED, always make sure to UN-CHECK the "XXXXXXX_prod_generic_amss.esco" flash file before you click the FLASH Button. By Skipping this file, you can always re-enter "00000000" to unlock your phone again after flashing.

100% 100% working Thank u very much

[nhumanh]

after use this method, phone is on .
But I want to change bootloader to Qualcomm to flash custom rom , it show

ERROR: Data Rejected at SEQ 0x3

How can i change to Qualcomm boot ?

[Bruno Rafael]

hi, my phone is Lumia 710 ( hang in logo), but a try this 7 step in first post in this thered.
my phone is live now.
But...i need unlock bootloader for install app ( .XAP) but error in flash!

conditions:

Phone power on Ok!
Simlock = Unlocked
but show-me this error after try flash :

Sending OSBL Certificate
HASH: C72DBA3ABED42215584093FA9DE247381D6062B4
Certificate Size: 452 Bytes

ERROR: Data Rejected at SEQ 0x3
Status : WRITE OSBL CERTIFICATE FAILED

how to repair this without test point?

[Bruno Rafael]

I have a lumia 710 not start it, appears the name of nokia and off.
I repair boot, and atf software shows that were recorded, but the phone is not recognized as Qualcomm, so I can not do the rest of the repair (BOOT recording RAW files).
What should I do?

my error in flash is:

ERROR: Data Rejected at SEQ 0x11

[setro2008]

Originally Posted by Advance-Box

The solution described below is for phones with "un-alligned" or corrupted AMSS + ADSP Region caused by improper custom firmware flashing or by other means of data corruption.

Here is sample logs showing the error during Normal USB Flashing:

================================================== ======
Sending OSBL Certificate HASH: C72DBA3ABED42215584093FA9DE247381D6062B4
Certificate Size: 452 Bytes

ERROR: Data Rejected at SEQ 0x3
Status : WRITE OSBL CERTIFICATE FAILED
==============================================


STEP 1:
In order to fix this problem, you first need to write QUALCOMM OSBL to your phone via TP Method.

Select Correct Phone Type and make sure M.B.R. + SEC_BOOT + OSBL QCOM is selected as well. Then click REPAIR BOOT!!!





STEP 2:
Remove USB Cable and press and hold POWER BUTTON for 18 Seconds. Then press and hold VOLUME UP Button while connecting the USB Cable to the phone.

*** Your Phone should now be detected as a New HDD Device and Windows will ask you to FORMAT IT... Of course

DO NOT FORMAT

STEP 3:
Download the proper RAW BOOT Files for your phone.


Lumia 710 RM-803 and RM-809
Lumia 800 RM-801 and RM-819
Lumia 800C RM-802



STEP 4:
Go to eMMC Direct tab in ATF Software and click "Scan Partitions". If your phone is NOT DETECTED, go back to STEP 2. Repeat Step 2 until your phone is DETECTED Properly.

After ATF Software successfully Lists the Partitions Found on the Phone, click "Backup Phone Data" so you will save your IMEI, Simlocks and other important data safely.





STEP 5:
Now Let us write Boot Files which you downloaded from Step 3.
Extract the RAR file and then write the 3 RAW Boot Files 1 by 1:

5a. dbl_RM-XXX.bin <--- Write this to 0x4D - DBL Partition
5b. osbl_nokia_RM-XXX.bin <--- Write this to 0x46 - OSBL Partition
5c. amss_adsp_RM-XXX.bin <--- Write this to 0x0C - AMSS_ADSP Partition

5a - DBL



5b - OSBL_NOKIA



5c - AMSS_ADSP



STEP 6:
Click "SP UNLOCK" if you want to unlock your phone after fixing the BOOTS.



STEP 7:
Flash the WP_OS partition using your regular ESCO Flash Files. This will have the same effect as you will flash the phone via USB... but via eMMC Direct, it is faster and does not care if your KEYSTORE is damaged or erased.

Write Flash file to 0x48 WP_OS Partition.

Flash File should be the BOOT file and should be more than 300 MB in size.

It looks like this:

RMxxx_11111_prod_111_11_boot.esco <--- 300+ MB









*** WARNING: Everytime you flash your phone with another firmware, you will always RESET the SP Lock status and RESET the SP Lock Counters. To avoid your phone from getting RE-LOCKED, always make sure to UN-CHECK the "XXXXXXX_prod_generic_amss.esco" flash file before you click the FLASH Button. By Skipping this file, you can always re-enter "00000000" to unlock your phone again after flashing.

this the error
Windows Phone Flashing Started

OSBL File Found:
RM803_12w12_prod_generic_nokia_osbl_0605.esco
ADSP File Found:
RM803_12w12_prod_generic_adsp_0605.esco
AMSS File Found:
RM803_12w12_prod_generic_amss_0605.esco
WPOS File Found:
RM809_12w12_prod_tmous_0605.esco
USER AREA ERASE File Found:
RM803_12w12_prod_generic_user_area_erase_0605.esco

================================================== ====
Windows Phone Lumia Flasher
================================================== ====

If the Phone is ALIVE
1. Power On the Phone and Connect it to the USB Port

If the Phone is DEAD
1. Press and Hold the VOLUME UP button
2. Connect it to the USB Port while still Pressing
the VOLUME UP button
3. Continue to Press the VOLUME UP button for 8 more
seconds
================================================== ====


Sending OSBL Certificate
HASH: C72DBA3ABED42215584093FA9DE247381D6062B4
Certificate Size: 452 Bytes

ERROR: Data Rejected at SEQ 0x3
Status : WRITE OSBL CERTIFICATE FAILED