STEP BY STEP repair Totally Dead EMMC via NAND_RE# PIN - (ADDED eMMC TYPE M, N & O)

[Advance-Box]

Originally Posted by Marscel_Jr

pls uploade update offline new version

All pinouts will be saved here:
C:\AdvanceBox Turbo Flasher\eMMC\eMMC_TP\

When you UPDATE IMPORTANT FILES

[chand_gee]

@x-shadow
please reply this post
http://forum.gsmhosting.com/vbb/f609...-name-1942785/

[amirjco4]

WHAT IS MY PROBLEM ?
File Author: ATF Team @ X-Shadow
Date Created: 19/03/2015 (dd/mm/yyyy)
Description: Samsung eMMC Firmware
eMMC Part Number: KLM8G2YE4C-C001
eMMC Product Name: M8G2YC
eMMC Product Rev: 0.0

Preparing eMMC for Firmware Update...
Sending eMMC Firmware Blocks...
All Blocks Sent!
NAND Write Delay: 1 Second (Please Wait)
Verifying eMMC Firmware...
eMMC Firmware Verify OK!
Applying eMMC Firmware Update...
Waiting for Device Re-Initialization...
Firmware Write Protect Delay: 1 Second (Please Wait)
Checking eMMC Firmware Update Status...
ERROR: eMMC Firmware Programming Failed 0x02
Total Elapsed Time 00:00:22

[Advance-Box]

@amirjco4

Which Option did you use to Update the firmware?

Update + Format or Update Only?

[WWWmomentoWWW]

that an error? i9300 restored by tp, without
removing from the board
eMMC Test Point Connection Module
==================================================
====
==================================================
====
1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.
WARNING: Wrong Test Point Connected! 0x00EE4321

[WWWmomentoWWW]

that an error? i9300 restored by tp, without
removing from the board
eMMC Test Point Connection Module
==================================================
====
==================================================
====
1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.
WARNING: Wrong Test Point Connected! 0x00EE4321

[WWWmomentoWWW]

that an error? i9300 restored by tp, without
removing from the board
eMMC Test Point Connection Module
==================================================
====
==================================================
====
1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.
WARNING: Wrong Test Point Connected! 0x00EE4321

[WWWmomentoWWW]

that an error? i9300 restored by tp, without
removing from the board
eMMC Test Point Connection Module
==================================================
====
==================================================
====
1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.
WARNING: Wrong Test Point Connected! 0x00EE4321

[WWWmomentoWWW]

that an error? i9300 restored by tp, without
removing from the board
eMMC Test Point Connection Module
==================================================
====
==================================================
====
1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.
WARNING: Wrong Test Point Connected! 0x00EE4321

[WWWmomentoWWW]

that an error? i9300 restored by tp, without
removing from the board
eMMC Test Point Connection Module
==================================================
====
==================================================
====
1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.
WARNING: Wrong Test Point Connected! 0x00EE4321

[WWWmomentoWWW]

that an error? i9300 restored by tp, without
removing from the board
eMMC Test Point Connection Module
==================================================
====
==================================================
====
1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.
WARNING: Wrong Test Point Connected! 0x00EE4321

[WWWmomentoWWW]

that an error? i9300 restored by tp, without
removing from the board
eMMC Test Point Connection Module
==================================================
====
==================================================
====
1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.
WARNING: Wrong Test Point Connected! 0x00EE4321

[Advance-Box]

Maybe try to read error message you posted 8 times...

It actually tells you what is the problem.

[habeebkambrath]

Originally Posted by Advance-Box

So here is ATF Solution which was already released last month:
http://forum.gsmhosting.com/vbb/f475...015-a-1933451/

It was a REAL First in the World Solution which took just 1 day to make analyzing 64KB eMMC BOOTROM.

Copy pasters will always copy paste... because they are stupid
And they will always pretend to be "First In The World" because they have a small... (you know)

Anyway... Sticking to Thread Title.
Without using eMMC Socket Adatpers to GROUND NAND RE# line,
you can do it manually by soldering 1 extra wire and connect it to
GROUND. This is not "MAGIC" Test Point... magic is only for those
who do not understand what is really happening

Step 1: Remove eMMC From PCB and Check Pinouts.
For now I will release 3 Pinouts for eMMCs will problematic firmware.
In total there will be more than 20 kinds of PINOUTS for all Samsung BGA-153/169/162 eMMCs.

Here is eMMC NAND Factory Pinout Type A:




Here is eMMC NAND Factory Pinout Type B:




Here is eMMC NAND Factory Pinout Type C:




Here is eMMC NAND Factory Pinout Type D:




Here is eMMC NAND Factory Pinout Type E:




Here is eMMC NAND Factory Pinout Type F:



Here is eMMC NAND Factory Pinout Type G:



Step 2: Solder RED PIN to Ground by using a very thin wire. Then put your eMMC in the eMMC Programming Socket like SmartGSM eMMC Socket or Moorc eMMC Socket etc...

Step 3: ATF Software will now detect your eMMC and eMMC Name will be "000000" by default. If your eMMC is not detected, then check your soldering and your eMMC Socket alignment etc...


*** ONLY PROCEED TO STEP 4 is eMMC IS ALREADY DETECTED in ATF Software ***


Step 4: Use scissors to cut thin wire which connect the RED PIN to GROUND. You can use other method to do this, but make sure that the RED PIN is NO LONGER Connected to GROUND.

Step 5: Perform "Samsung eMMC Firmware Update" via ATF Software.

Now eMMC Firmware will be Repaired

Resize BOOT sizes, Write back EXT_CSD if necessary...

Emmc will be like "Brand New", so don't forget to write BOOT1 and USER Partitions and set BOOT Partition Correctly.




In Summary, You just need to GROUND NAND_RE# of NAND so that
BOOTROM cannot read the corrupted firmware from the NAND Chip
inside the eMMC. Hope it will be good lesson for aspiring hackers.

How to FIND NAND_RE of any Samsung eMMC ???

I will soon add support for this in eMMC TP Finder

B.R.

Dear ATF Team,Flight mode after Updating eMMC Firmware,any Solution?

[allumts]

@habeebkambrath,

instead of quote an Full Big post ...becouse not post you log of repair?

BR