Unlock lumia 800 - GSM-Forum

hippolyte85 · 02-06-2013, 17:36

I AV TRied to unlock lumia 800 without success bcoz some error ;
"ERROR: Dump Aborted, Too Much Read Failures!"

1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.

Interface Reset OK!
Reading Platform Information...
Selecting Active Handle...
Select Handle OK!
Sending Ping...
Ping Reply OK!

Lumia 800/800C Detected

Storage Device Information
Manufacturer ID: 90
Application ID : 014A
Product Name : HYNIX
Product Rev : 5C
Product SN : 001612C1

Protection Information
Write Protect A: OFF
Write Protect B: OFF

Dumping AMSS FAT16 Region
Please wait for 2-4 Minutes...
ERROR: Dump Aborted, Too Much Read Failures!

Total Elapsed Time 00:02:15

plz how can i solve this error?

..::Angel::.. · 02-06-2013, 20:32

@hippolyte85

1st way:

- Make sure you connect USB cable after ATF Software tells you to
- Try few more times as its "HYNIX CHIP"

2nd way:

- Unlock using ATF Light or Nitro box

3rd way using your ATF Big Box:

- Tick on OSBL QUALCOMM in boot-loaders and Repair BOOT
- Unlock via USB cable only from eMMC Direct tab

BR

hippolyte85 · 02-10-2013, 11:29

thx dear when i tried to unlock via usb using ems direct unlock i av this message
AMSS Partition Not Found
plz another way for me?

hippolyte85 · 02-10-2013, 11:29

thx dear when i tried to unlock via usb using ems direct unlock i av this message
AMSS Partition Not Found
plz another way for me?

..::Angel::.. · 02-10-2013, 17:17

Quote:

Originally Posted by hippolyte85

thx dear when i tried to unlock via usb using ems direct unlock i av this message
AMSS Partition Not Found
plz another way for me?

Hi,

Then follow this:

1. Change boot-loader via TP to OSBL DLOAD
2. Flash phone with new version 7.8 - tested for unlock
3. Change boot-loader again via TP to OSBL QUALCOMM
4. Unlock via USB cable

BR

02-06-2013, 17:36	#1 (permalink)
hippolyte85 No Life Poster Join Date: Oct 2006 Location: yaoundé (av kennedy) Posts: 1,223 Member: 361348 Status: Offline Thanks Meter: 635	Unlock lumia 800 I AV TRied to unlock lumia 800 without success bcoz some error ; "ERROR: Dump Aborted, Too Much Read Failures!" 1. DO NOT USE THE PHONE"S BATTERY 2. Connect the Soldered TP Connections to ATF Box 3. Disconnect the USB Cable and Wait until the the ATF Software will tell you to Connect the USB. Interface Reset OK! Reading Platform Information... Selecting Active Handle... Select Handle OK! Sending Ping... Ping Reply OK! Lumia 800/800C Detected Storage Device Information Manufacturer ID: 90 Application ID : 014A Product Name : HYNIX Product Rev : 5C Product SN : 001612C1 Protection Information Write Protect A: OFF Write Protect B: OFF Dumping AMSS FAT16 Region Please wait for 2-4 Minutes... ERROR: Dump Aborted, Too Much Read Failures! Total Elapsed Time 00:02:15 plz how can i solve this error?

02-06-2013, 20:32	#2 (permalink)
..::Angel::.. No Life Poster Join Date: Dec 2006 Location: Karachi, Pakistan Age: 33 Posts: 16,237 Member: 643472 Status: Offline Sonork: 100.96901 Thanks Meter: 16,589	@hippolyte85 1st way: - Make sure you connect USB cable after ATF Software tells you to - Try few more times as its "HYNIX CHIP" 2nd way: - Unlock using ATF Light or Nitro box 3rd way using your ATF Big Box: - Tick on OSBL QUALCOMM in boot-loaders and Repair BOOT - Unlock via USB cable only from eMMC Direct tab BR

02-10-2013, 11:29	#3 (permalink)
hippolyte85 No Life Poster Join Date: Oct 2006 Location: yaoundé (av kennedy) Posts: 1,223 Member: 361348 Status: Offline Thanks Meter: 635	thx dear when i tried to unlock via usb using ems direct unlock i av this message AMSS Partition Not Found plz another way for me?

02-10-2013, 11:29	#4 (permalink)
hippolyte85 No Life Poster Join Date: Oct 2006 Location: yaoundé (av kennedy) Posts: 1,223 Member: 361348 Status: Offline Thanks Meter: 635	thx dear when i tried to unlock via usb using ems direct unlock i av this message AMSS Partition Not Found plz another way for me?