Wont flash Lumia 610! <<< ANSWERED >>> - GSM-Forum

Rocco · 07-10-2012, 08:51

Windows Phone Flashing Started

AMSS File Found:
RM835_12w16_prod_generic_amss.esco
WPOS File Found:
RM835_12160_prod_426_01_boot.esco
USER AREA ERASE File Found:
RM835_12w16_prod_generic_user_area_erase.esco
WARNING: OSBL File is not Loaded
WARNING: MODEM ADSP File is not Loaded

================================================== ====
Windows Phone Lumia Flasher
================================================== ====

If the Phone is ALIVE
1. Power On the Phone and Connect it to the USB Port

If the Phone is DEAD
1. Press and Hold the VOLUME UP button
2. Connect it to the USB Port while still Pressing
the VOLUME UP button
3. Continue to Press the VOLUME UP button for 8 more
seconds
================================================== ====

================================================
Basic Phone Information
================================================

================================================
Extended Phone Information
================================================

Rebooting to OSBL MODE
Switching to NOKIA MODE
Polling Ports... (Please Wait)

When I pressed the volume up button, and connected the usb cable, in the software only blink under the "inacializing connection" and maybe the "windows mobile function (Nokia Mode)"
Blink so quickly, that I cannot read correctly....

Drivers uninstalled, Win USB Drivers x86 reinstalled.
So, why wont flash the atf this phone?

**Advance-Box** · 07-10-2012, 11:01

@Rocco

Make sure you CLOSE ZUNE or Nokia Care Suite softwares...

Turn ON Phone and wait until phone UI menu is 100% loaded.

Connect USB cable to phone.

On ATF Software, make sure you selected "Windows Phone" and "610" then click
Scan Phone... You should see something like this...
[img[http://174.120.45.27/tmp/610.png[/img]

Click "Phoenix INI" so that the flash files will be loaded.

Then click Flash Button.

Code:

Windows Phone Flashing Started

AMSS File Found:
 RM835_12w14_1_prod_generic_amss.esco
WPOS File Found:
 RM835_12141_prod_309_01_boot.esco
USER AREA ERASE File Found:
 RM835_12w14_1_prod_generic_user_area_erase.esco
WARNING: OSBL File is not Loaded
WARNING: MODEM ADSP File is not Loaded
                                                      
======================================================
             Windows Phone Lumia Flasher              
======================================================
                                                      
If the Phone is ALIVE                                 
  1. Power On the Phone and Connect it to the USB Port
                                                      
If the Phone is DEAD                                  
  1. Press and Hold the VOLUME UP button              
  2. Connect it to the USB Port while still Pressing  
     the VOLUME UP button                             
  3. Continue to Press the VOLUME UP button for 8 more
     seconds                                          
======================================================
                                                      

================================================
             Basic Phone Information             
================================================
SW Version             : 1066.0000.8773.12141
IMEI Plain               : 359313044083479
HW Version            : 112.1569.1.0
Product Code         : 059P528
Basic Product Code: 059M5R4
Module Code          : 0205127
PSN Number           : 033E4E6AB
NCSD Version         : 1.9

================================================
            Extended Phone Information           
================================================
Public ID           : AD0E2722A025F14C2B0E1F9223105426
Wireless Lan ID: 3C:36:3D:CF:88:D0:00:00
Bluetooth ID     : 3C:36:3D:CF:86:DD:00:00:FF:FF:FF:FF

Rebooting to OSBL MODE

Sending AMSS Certificate
HASH: 0A3B18ABC63D2CF5A23BEBC1500E56E22163B717
Certificate Size: 449 Bytes
Status     : WRITE AMSS CERTIFICATE SUCCESS

Sending AMSS Data Blocks
(Please Wait for 25 Seconds...)
Status     : AMSS WRITE SUCCESS

Sending WPOS Certificate
HASH: 0A3B18ABC63D2CF5A23BEBC1500E56E22163B717
Certificate Size: 1364 Bytes
Status     : WRITE WPOS CERTIFICATE SUCCESS

Sending WPOS Data Blocks
[BLOCK 1 0x00000000~0x00FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 1EC5CD6ABA1C3488C24158FD4D8E65D7
----------  : 8A68B41D2220F88D93B57BE9A588A829
Status     : WPOS WRITE SUCCESS
[BLOCK 2 0x01000000~0x0151D3FF]
Data Size: 0x0051D400 Bytes
SHA-256 : B050C1167AD97B37DBF09A97354102D3
----------  : 704FF304A5E08A2C417BA9CCF9CA5FA7
Status     : WPOS WRITE SUCCESS
[BLOCK 3 0x0155D400~0x01FFFFFF]
Data Size: 0x00AA2C00 Bytes
SHA-256 : B745190AD67CC04F57F1C381292676A9
----------  : C86E49AB00A5F00ED5470DC2D9016E86
Status     : WPOS WRITE SUCCESS
[BLOCK 4 0x02000000~0x02FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : CABD81E4194B6CC6E71DD0B92F7137EE
----------  : 0539FE10E49097C769481AA7A4B889BA
Status     : WPOS WRITE SUCCESS
[BLOCK 5 0x03000000~0x03FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 72582C0940CD1DD8981BACAF8AB4D705
----------  : C47529F947EBE9268A86071465BC7CC4
Status     : WPOS WRITE SUCCESS
[BLOCK 6 0x04000000~0x04FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 3B0767109DBCFDDDA14AD013C5B7BE2D
----------  : B5FD9B843EBC7DF45F1E9873BA61F2E4
Status     : WPOS WRITE SUCCESS
[BLOCK 7 0x05000000~0x05FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 269D8F7D74E35F27F08EB7FFCB0351E3
----------  : FDC54FACAA440D3CCCDB6CF0CDEDC7F2
Status     : WPOS WRITE SUCCESS
[BLOCK 8 0x06000000~0x06FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 1618ABCD515B4656F0C790355E8AD597
----------  : 651C117823E078AFEDDF66B5BAFD24BB
Status     : WPOS WRITE SUCCESS
[BLOCK 9 0x07000000~0x07FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 1987EC3E1395E07B44ADABA080425D54
----------  : A670A5DA756BF5CDE8C5508DFCA225D1
Status     : WPOS WRITE SUCCESS
[BLOCK 10 0x08000000~0x08FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : F78C16AEC80642C227C7D8B31C6E7D4B
----------  : 1FF63CDDFEB97E7CE2C88E9AFECBFB05
Status     : WPOS WRITE SUCCESS
[BLOCK 11 0x09000000~0x09FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : F3057B77AA5378E8CD3B2C537A335547
----------  : F838D3CF1341EB71DADF3401A1DFA78D
Status     : WPOS WRITE SUCCESS
[BLOCK 12 0x0A000000~0x0AFFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : EEAA63E8624C3A65E46056E69119B1B0
----------  : 3543E882E840F43021AD82117DD790C6
Status     : WPOS WRITE SUCCESS
[BLOCK 13 0x0B000000~0x0BFFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 210ACB83F013ABF14965E8BBE993794A
----------  : 98B37DE49CAA4E2A4424579E4A34551F
Status     : WPOS WRITE SUCCESS
[BLOCK 14 0x0C000000~0x0CFFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 3F2B08BFE4D84604DBA0576CCDA14C43
----------  : 3AAB9C44AFB306BFD699820C85E2951D
Status     : WPOS WRITE SUCCESS
[BLOCK 15 0x0D000000~0x0DFFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 54BA0266A91BA3FDA179782E3D14BE3C
----------  : B8484B52859087AF032D24E17AE08F41
Status     : WPOS WRITE SUCCESS
[BLOCK 16 0x0E000000~0x0EFFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 862DC063850F03D3419EE6FF00829FC4
----------  : 6700568D7FCB8F92424AA2884DB5B4BE
Status     : WPOS WRITE SUCCESS
[BLOCK 17 0x0F000000~0x0FFFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : 4C8A526889BB3E3E6129C52F76AFEA8E
----------  : E58FC639B84BBD2624BC7E49A7115CCE
Status     : WPOS WRITE SUCCESS
[BLOCK 18 0x10000000~0x10FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : C3FCDE147BBDC477EEACC6A973331E5C
----------  : 43EFE7FD2D071ABEF5EF5B7450AABC2E
Status     : WPOS WRITE SUCCESS
[BLOCK 19 0x11000000~0x11FFFFFF]
Data Size: 0x01000000 Bytes
SHA-256 : A640E144FF4E00AD550C64BCEC6BCFD0
----------  : 156791DF86EF80578C67071AAC3AAC33
Status     : WPOS WRITE SUCCESS
[BLOCK 20 0x12000000~0x120C01FF]
Data Size: 0x000C0200 Bytes
SHA-256 : 6D08569FBB904A4AB0733247C949CAC3
----------  : 9A83ECC3A0EF2AC13C1A095AFF63F722
Status     : WPOS WRITE SUCCESS

Sending USER AREA ERASE Certificate
HASH: 0A3B18ABC63D2CF5A23BEBC1500E56E22163B717
Certificate Size: 396 Bytes
Status    : WRITE ERASE CERTIFICATE SUCCESS

Erasing USER AREA
Status    : ERASE SUCCESS

Flashing Done!
Total Flashing Time (Erase + Flashing) : 00:01:59

B.R.

Rocco · 07-12-2012, 15:14

Wont Work!

Zune uninstalled
Zune drivers from aft map installed.
Scan phone OK
but, by flashing its same error: Only blink under the "inacializing connection" and maybe the "windows mobile function (Nokia Mode)"

I try with another pc......

================================================== ====

If the Phone is ALIVE
1. Power On the Phone and Connect it to the USB Port

If the Phone is DEAD
1. Press and Hold the VOLUME UP button
2. Connect it to the USB Port while still Pressing
the VOLUME UP button
3. Continue to Press the VOLUME UP button for 8 more
seconds
================================================== ====

Switching to NOKIA MODE
Polling Ports... (Please Wait)

================================================
Basic Phone Information
================================================
SW Version : 1066.0000.8779.12201
IMEI Plain : 353263055895053
HW Version : 112.1569.1.0
Product Code : 059P5P0
Basic Product Code: 059L3R3
Module Code : 0205127
PSN Number : 47FAF46AB
NCSD Version : 1.9

================================================
Extended Phone Information
================================================
Public ID : F4329E5B2A0A0B169BF8912C6AF9028A
Wireless Lan ID: A4:E7:31:74:A4:06:00:00
Bluetooth ID : A4:E7:31:72:CF:46:00:00:FF:FF:FF:FF

Rebooting to OSBL MODE

Rocco · 07-12-2012, 15:27

So

On another PC:

-I installed the aft 8.70
-connected the lumia 610 and installed the device drivers from the "c:\AdvanceBox Turbo Flasher\Driver\Zune Drivers\" map.
- click to scan phone..
- Now the phone get to another modus
Scanning USB Ports...
Switching to NOKIA MODE
Polling Ports... (Please Wait)
-Pc finded new hardware: USB\Vid_0421&Pid_05ef
-The "c:\AdvanceBox Turbo Flasher\Driver\Zune Drivers\" map not cotains the correct driver to this hardware!

Rocco · 07-12-2012, 15:40

- I installed the drivers from the "c:\AdvanceBox Turbo Flasher\Driver\Lumia Phone Drivers\" map. This contains the good drivers now.
- schan phone will be OK!
- Flash started, VOL UP holded, and just blink the "inacializing connection" and maybe the "windows mobile function (Nokia Mode)"

07-10-2012, 08:51	#1 (permalink)
Rocco Freak Poster Join Date: Apr 2004 Location: EU Age: 33 Posts: 227 Member: 60809 Status: Offline Thanks: 9 Thanked 26 Times in 13 Posts	Wont flash Lumia 610! <<< ANSWERED >>> Windows Phone Flashing Started AMSS File Found: RM835_12w16_prod_generic_amss.esco WPOS File Found: RM835_12160_prod_426_01_boot.esco USER AREA ERASE File Found: RM835_12w16_prod_generic_user_area_erase.esco WARNING: OSBL File is not Loaded WARNING: MODEM ADSP File is not Loaded ================================================== ==== Windows Phone Lumia Flasher ================================================== ==== If the Phone is ALIVE 1. Power On the Phone and Connect it to the USB Port If the Phone is DEAD 1. Press and Hold the VOLUME UP button 2. Connect it to the USB Port while still Pressing the VOLUME UP button 3. Continue to Press the VOLUME UP button for 8 more seconds ================================================== ==== ================================================ Basic Phone Information ================================================ ================================================ Extended Phone Information ================================================ Rebooting to OSBL MODE Switching to NOKIA MODE Polling Ports... (Please Wait) When I pressed the volume up button, and connected the usb cable, in the software only blink under the "inacializing connection" and maybe the "windows mobile function (Nokia Mode)" Blink so quickly, that I cannot read correctly.... Drivers uninstalled, Win USB Drivers x86 reinstalled. So, why wont flash the atf this phone?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-12-2012, 15:14	#3 (permalink)
Rocco Freak Poster Join Date: Apr 2004 Location: EU Age: 33 Posts: 227 Member: 60809 Status: Offline Thanks: 9 Thanked 26 Times in 13 Posts	Wont Work! Zune uninstalled Zune drivers from aft map installed. Scan phone OK but, by flashing its same error: Only blink under the "inacializing connection" and maybe the "windows mobile function (Nokia Mode)" I try with another pc...... ================================================== ==== If the Phone is ALIVE 1. Power On the Phone and Connect it to the USB Port If the Phone is DEAD 1. Press and Hold the VOLUME UP button 2. Connect it to the USB Port while still Pressing the VOLUME UP button 3. Continue to Press the VOLUME UP button for 8 more seconds ================================================== ==== Switching to NOKIA MODE Polling Ports... (Please Wait) ================================================ Basic Phone Information ================================================ SW Version : 1066.0000.8779.12201 IMEI Plain : 353263055895053 HW Version : 112.1569.1.0 Product Code : 059P5P0 Basic Product Code: 059L3R3 Module Code : 0205127 PSN Number : 47FAF46AB NCSD Version : 1.9 ================================================ Extended Phone Information ================================================ Public ID : F4329E5B2A0A0B169BF8912C6AF9028A Wireless Lan ID: A4:E7:31:74:A4:06:00:00 Bluetooth ID : A4:E7:31:72:CF:46:00:00:FF:FF:FF:FF Rebooting to OSBL MODE

07-12-2012, 15:27	#4 (permalink)
Rocco Freak Poster Join Date: Apr 2004 Location: EU Age: 33 Posts: 227 Member: 60809 Status: Offline Thanks: 9 Thanked 26 Times in 13 Posts	So On another PC: -I installed the aft 8.70 -connected the lumia 610 and installed the device drivers from the "c:\AdvanceBox Turbo Flasher\Driver\Zune Drivers\" map. - click to scan phone.. - Now the phone get to another modus Scanning USB Ports... Switching to NOKIA MODE Polling Ports... (Please Wait) -Pc finded new hardware: USB\Vid_0421&Pid_05ef -The "c:\AdvanceBox Turbo Flasher\Driver\Zune Drivers\" map not cotains the correct driver to this hardware!

07-12-2012, 15:40	#5 (permalink)
Rocco Freak Poster Join Date: Apr 2004 Location: EU Age: 33 Posts: 227 Member: 60809 Status: Offline Thanks: 9 Thanked 26 Times in 13 Posts	- I installed the drivers from the "c:\AdvanceBox Turbo Flasher\Driver\Lumia Phone Drivers\" map. This contains the good drivers now. - schan phone will be OK! - Flash started, VOL UP holded, and just blink the "inacializing connection" and maybe the "windows mobile function (Nokia Mode)"