6+ front camera not working after touch IC - GSM-Forum

alfyguy · 10-12-2016, 22:56

I'm not exactly sure why but I've had a couple 6+ phones that when replacing the touch IC i get no front camera. Any ideas what the issue could be and whats causing it?

mastermsc · 10-13-2016, 15:50

check the filters on the other side near front cam FPC. some of them will be loose

boudi_hakerz · 10-14-2016, 01:04

from 2 week i had the same problem after change touch ic 2 cam and finger print stop working after long searching i realised the problem from cpu because i am use High temperature and i give you advice check all capasitor and resistor near connector cam

Kradziej · 10-14-2016, 21:25

high temp + thin motherboard + glued elements around connectors = some elements under glue sometimes desolder itself

10-12-2016, 22:56	#1 (permalink)
alfyguy Freak Poster Join Date: Dec 2010 Posts: 253 Member: 1481974 Status: Offline Thanks Meter: 42	6+ front camera not working after touch IC I'm not exactly sure why but I've had a couple 6+ phones that when replacing the touch IC i get no front camera. Any ideas what the issue could be and whats causing it?

10-13-2016, 15:50	#2 (permalink)
mastermsc Junior Member Join Date: Apr 2016 Posts: 14 Member: 2560985 Status: Offline Thanks Meter: 0	check the filters on the other side near front cam FPC. some of them will be loose

10-14-2016, 01:04	#3 (permalink)
boudi_hakerz Freak Poster Join Date: Nov 2009 Posts: 492 Member: 1168485 Status: Offline Thanks Meter: 36	from 2 week i had the same problem after change touch ic 2 cam and finger print stop working after long searching i realised the problem from cpu because i am use High temperature and i give you advice check all capasitor and resistor near connector cam

10-14-2016, 21:25	#4 (permalink)
Kradziej Freak Poster Join Date: Sep 2015 Posts: 198 Member: 2453408 Status: Offline Thanks Meter: 63	high temp + thin motherboard + glued elements around connectors = some elements under glue sometimes desolder itself