Ipad Mini touch no response, home button fine - GSM-Forum

zwartemerel · 07-23-2014, 08:50

After a replace from the digitizer of a i pad mini i had the following problem.

ill tested the touchscreen before i sticked it in the housing,
everything works fine, then i took off the plastic protecting stripes of the stick tape, and stick the touchscreen in the housing.

after that the touch didnt respond, the home button works fine.
ill disassembly the touch, check the connectors, everything looks fine.
but the touch doesnt response anymore.

ive tried a hard reset, charge fully, disconnect/reconnect the connectors of digitizer/lcd/accu, but no luck.

ive found many information about touchscreens who has his own life after replacement, but thats not my problem, he didnt do anything.

what can i try to fix it?

elazab1_100 · 07-23-2014, 10:58

I have same problem.

iphoneecia · 07-25-2014, 15:42

try rehot the touch screen connector

reddemonic · 07-25-2014, 15:48

can you try another digitizer even might cost you?

you might have ripped the flex while you removing the protector. the flex is very easy to tear.

07-23-2014, 08:50	#1 (permalink)
zwartemerel Junior Member Join Date: Jul 2013 Posts: 4 Member: 1979961 Status: Offline Thanks Meter: 0	Ipad Mini touch no response, home button fine After a replace from the digitizer of a i pad mini i had the following problem. ill tested the touchscreen before i sticked it in the housing, everything works fine, then i took off the plastic protecting stripes of the stick tape, and stick the touchscreen in the housing. after that the touch didnt respond, the home button works fine. ill disassembly the touch, check the connectors, everything looks fine. but the touch doesnt response anymore. ive tried a hard reset, charge fully, disconnect/reconnect the connectors of digitizer/lcd/accu, but no luck. ive found many information about touchscreens who has his own life after replacement, but thats not my problem, he didnt do anything. what can i try to fix it?

07-23-2014, 10:58	#2 (permalink)
elazab1_100 Junior Member Join Date: Jul 2007 Posts: 1 Member: 551277 Status: Offline Thanks Meter: 0	I have same problem.

07-25-2014, 15:42	#3 (permalink)
iphoneecia Freak Poster Join Date: May 2012 Location: Brazil Posts: 147 Member: 1759455 Status: Offline Thanks Meter: 9	try rehot the touch screen connector

07-25-2014, 15:48	#4 (permalink)
reddemonic Major Poster Join Date: Jul 2014 Posts: 47 Member: 2228871 Status: Offline Thanks Meter: 8	can you try another digitizer even might cost you? you might have ripped the flex while you removing the protector. the flex is very easy to tear.