Iphone 5 Show [NAND] _FindFlashMediaAndKeepout - GSM-Forum

murtaza_nns · 08-19-2014, 13:01

Iphone 5 showing this error at startup. Any solution?

jamesjerss · 08-19-2014, 13:15

did yu replace display ?

if after replace display it hppnd means disassemble mob unplug al flex cable nd display except usb flex den restore using itunes. if successful restored yur mob must be fixed.

if not replace board

swop-shop · 08-28-2014, 20:42

Disconnect the front camera try that .

Sent from my SM-N9005 using Tapatalk

**Brka** · 08-28-2014, 22:19

checking borrowed blocks - count: 23 - max_count: 23

looks like emmc (filesystem part) reched maxmimum number of bad blocks ...

but in short ... that means mainboard replacing ...

b.r.
Alex

Milord85 · 09-04-2014, 12:56

the MB is in short, check for something around display connectors.
i got same error on an iphone 5 that had the C211 and C210 shorted. check it near the front camera connector.

ss.com · 09-04-2014, 13:06

100%solution have contact me bacham_15 by skype

swop-shop · 09-04-2014, 18:10

ss.com post info on here

Sent from my SM-N9005 using Tapatalk

Milord85 · 09-04-2014, 23:33

yeah, if you got 100% solution, post it here so it can help someone else in the future without asking you again...

reveal the NAND secret to the world!

ProcyOne · 09-05-2014, 08:41

Hi.
Try to replace compass ic or gyroscope ic.

krish neupane · 09-05-2014, 17:39

Bro same problem i got in one phone while replacing lcd and i fix the problem by reheat this ic please try and post result.

ss.com · 09-06-2014, 05:43

just remove this ic solve your problem

jameslym · 09-06-2014, 06:26

just change lcd is solve

fricosu007 · 01-10-2015, 12:47

when replacing LCD screen is only lighting up, nothing on the display and waiting for iPhone message on iTunes, no solution for me just by replacing LCD, probably that IC has to be removed .. i will try that and post result. If any other ideas please post a note ... BRGDS !!

fricosu007 · 01-10-2015, 13:06

IC removed now flashing OK ... 100 % Solution - Remove IC as instructed above !! Many THAANKS !!

fricosu007 · 01-10-2015, 13:07

Quote:

Originally Posted by ss.com

just remove this ic solve your problem

100 % working solution. MANY THANKS !

08-19-2014, 13:01	#1 (permalink)
murtaza_nns No Life Poster Join Date: Mar 2006 Age: 41 Posts: 2,350 Member: 247987 Status: Offline Sonork: 100.1609015 Thanks Meter: 542	Iphone 5 Show [NAND] _FindFlashMediaAndKeepout Iphone 5 showing this error at startup. Any solution?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-19-2014, 13:15	#2 (permalink)
jamesjerss No Life Poster Join Date: May 2010 Location: India,Tamilnadu-Nagercoil Age: 37 Posts: 5,962 Member: 1314938 Status: Offline Sonork: 100.1672340 Thanks Meter: 5,373	did yu replace display ? if after replace display it hppnd means disassemble mob unplug al flex cable nd display except usb flex den restore using itunes. if successful restored yur mob must be fixed. if not replace board

08-28-2014, 20:42	#3 (permalink)
swop-shop Freak Poster Join Date: Mar 2010 Posts: 116 Member: 1255232 Status: Offline Thanks Meter: 9	Disconnect the front camera try that . Sent from my SM-N9005 using Tapatalk

08-28-2014, 22:19	#4 (permalink)
Brka Moderator Join Date: Jun 1999 Location: Serbia Age: 48 Posts: 8,201 Member: 163 Status: Offline Thanks Meter: 7,777	checking borrowed blocks - count: 23 - max_count: 23 looks like emmc (filesystem part) reched maxmimum number of bad blocks ... but in short ... that means mainboard replacing ... b.r. Alex

09-04-2014, 12:56	#5 (permalink)
Milord85 Junior Member Join Date: Apr 2014 Posts: 23 Member: 2164014 Status: Offline Thanks Meter: 1	the MB is in short, check for something around display connectors. i got same error on an iphone 5 that had the C211 and C210 shorted. check it near the front camera connector.

09-04-2014, 13:06	#6 (permalink)
ss.com Freak Poster Join Date: Feb 2006 Location: B D S Age: 40 Posts: 462 Member: 237628 Status: Offline Sonork: 100.1668254 Thanks Meter: 140	100%solution have contact me bacham_15 by skype

09-04-2014, 18:10	#7 (permalink)
swop-shop Freak Poster Join Date: Mar 2010 Posts: 116 Member: 1255232 Status: Offline Thanks Meter: 9	ss.com post info on here Sent from my SM-N9005 using Tapatalk

09-04-2014, 23:33	#8 (permalink)
Milord85 Junior Member Join Date: Apr 2014 Posts: 23 Member: 2164014 Status: Offline Thanks Meter: 1	yeah, if you got 100% solution, post it here so it can help someone else in the future without asking you again... reveal the NAND secret to the world!

09-05-2014, 08:41	#9 (permalink)
ProcyOne No Life Poster Join Date: Jun 2007 Location: Swansea, UK Age: 41 Posts: 719 Member: 523318 Status: Offline Thanks Meter: 268	Hi. Try to replace compass ic or gyroscope ic.

09-05-2014, 17:39	#10 (permalink)
krish neupane Freak Poster Join Date: Dec 2006 Posts: 473 Member: 412812 Status: Offline Thanks Meter: 97	Bro same problem i got in one phone while replacing lcd and i fix the problem by reheat this ic please try and post result.

09-06-2014, 05:43	#11 (permalink)
ss.com Freak Poster Join Date: Feb 2006 Location: B D S Age: 40 Posts: 462 Member: 237628 Status: Offline Sonork: 100.1668254 Thanks Meter: 140	just remove this ic solve your problem

09-06-2014, 06:26	#12 (permalink)
jameslym Insane Poster Join Date: Apr 2005 Location: malaysia Age: 47 Posts: 89 Member: 138632 Status: Offline Thanks Meter: 4	just change lcd is solve

01-10-2015, 12:47	#13 (permalink)
fricosu007 Freak Poster Join Date: Mar 2007 Location: Romania Posts: 205 Member: 467437 Status: Offline Thanks Meter: 31	when replacing LCD screen is only lighting up, nothing on the display and waiting for iPhone message on iTunes, no solution for me just by replacing LCD, probably that IC has to be removed .. i will try that and post result. If any other ideas please post a note ... BRGDS !!

01-10-2015, 13:06	#14 (permalink)
fricosu007 Freak Poster Join Date: Mar 2007 Location: Romania Posts: 205 Member: 467437 Status: Offline Thanks Meter: 31	IC removed now flashing OK ... 100 % Solution - Remove IC as instructed above !! Many THAANKS !!