iphone 5s Error 4013 Repair Process. - GSM-Forum

CDMA_RASHID · 03-13-2019, 15:20

iphone 5s Error 4013 Repair Process.

I know there's Nothing New.

Hope that helps.

Tony2323 · 03-25-2019, 22:08

Good work, but I'd better clean the logic board from black glue.

CDMA_RASHID · 03-26-2019, 08:43

Quote:

Originally Posted by Tony2323

Good work, but I'd better clean the logic board from black glue.

Previously I too used to clean the black glue. But in the process lot of times the CPU was overheated and phone's got dead.

So i stopped glue cleaning as i feel is far better than cleaning the glue.

ali_imran · 03-27-2019, 09:29

Quote:

Originally Posted by CDMA_RASHID

Previously I too used to clean the black glue. But in the process lot of times the CPU was overheated and phone's got dead.

So i stopped glue cleaning as i feel is far better than cleaning the glue.

i agree with u bcz many time 5s dead in removing nand or cleaning glue
so be careful

Tony2323 · 03-29-2019, 09:28

I understand, I clean the glue at 270 degrees and everything is OK and functional. It happens to me that after 3 months of use NAND has to be soldering again. It would like to stick it with black glue again after soldering. But this cannot be because flux cannot be thoroughly cleaned.

03-13-2019, 15:20	#1 (permalink)
CDMA_RASHID No Life Poster Join Date: Jul 2008 Location: Mumbai Age: 36 Posts: 1,023 Member: 821646 Status: Offline Thanks Meter: 507	iphone 5s Error 4013 Repair Process. iphone 5s Error 4013 Repair Process. I know there's Nothing New. Hope that helps.

03-25-2019, 22:08	#2 (permalink)
Tony2323 Freak Poster Join Date: Sep 2010 Location: ČR Posts: 132 Member: 1388158 Status: Offline Thanks Meter: 30	Good work, but I'd better clean the logic board from black glue.

03-29-2019, 09:28	#5 (permalink)
Tony2323 Freak Poster Join Date: Sep 2010 Location: ČR Posts: 132 Member: 1388158 Status: Offline Thanks Meter: 30	I understand, I clean the glue at 270 degrees and everything is OK and functional. It happens to me that after 3 months of use NAND has to be soldering again. It would like to stick it with black glue again after soldering. But this cannot be because flux cannot be thoroughly cleaned.