Iphone hardware and software solutions in 24 hrs

[it-repair]

Originally Posted by awing darma

I Have iphone 4S, my problem is "Error 1" occur when i have install new Firmware.
does any one help me???

take a look if this parts available on the PCB iPhone 4S Kein Netz, und Itunes Error -1 beim Wiederherstellen

[ASHFAQmobclinic]

Originally Posted by ifamrm

iPhone 5 after apple logo power off.
Any solution?

check battery terminal if it is released. or change battery.

[adaseb]

iPhone 5S

Static thru headphones, already changed dock.

[west007]

hello everyone i have an iphone 5s the customer mistakenly dropped the phone it started rebooting the brought it to my office i try to reload the os now i have blue screen error 9 i need a solution anyone?

i will like to ask somepeople keep saying its the u2 ic error can i replace it with iphone 5 u2ic are they the same ?

[Rony_gsm]

[AppleMaster]

Hello Folks

I got an iphone 6 plus water damaged. I removed the metal shields on the board and it got cleaned real good. But still this is no power and while attempting to restore through itunes an error 4005 pops up.

I need a more professional help on this case and i was hoping that you guys could guide me on this one.

I hope to hear from you guys soon.

Thanks

[dog68]

Originally Posted by hamada_masrawy

I fix phones for money. it's my business. I had a customer with a broken iphone 6 screen. I moved the home button and camera to new lcd and connected that lcd to phone making sure all the cables were connected correctly and for some reason digitizer was not working.

I disconnected and reconnected cables again, turned phone off and back on a couple of times, and even disconnected and reconnected battery. The weird thing is digitizer would work at first when I did those actions but then it would stop working seconds later. I though that it was a bad lcd so i tried a different lcd and still had same problem. Even put on first broken lcd back and digitizer was still not working.

Everything else was working fine. if the problem is not with the LCD part, then what is it?

Did you not disconnect battery first? something is shorted, or damaged, inspect it carefuly.

[dog68]

Originally Posted by AppleMaster

Hello Folks

I got an iphone 6 plus water damaged. I removed the metal shields on the board and it got cleaned real good. But still this is no power and while attempting to restore through itunes an error 4005 pops up.

I need a more professional help on this case and i was hoping that you guys could guide me on this one.

I hope to hear from you guys soon.

Thanks

Hi, Inspect board closely, look for missing ends on capacitors etc, resolder them, test for shorts, water damage= short.

[ffmaer]

Long story short, I short circuited my second most expensive asset through a usb-male-audio-male. I'm devastated. It can't be turned on anymore. I'm not rich. I was still giddy about saving a dozen dollars during black Friday sales.

I understand basic elements of circuits. So I want to fix it myself.

I suspect that the battery is down. And I suspect some excessive current protection mechanism was triggered. The battery can be replaced easily.

So my question is that what might have been broken, and how to fix them.

If you can kindly share your knowledge, I will be grateful.

Sorry, I forgot to mention that my device is an iPhone 5

[ffmaer]

Long story short, I short circuited my second most expensive asset through a usb-male-audio-male. I'm devastated. It can't be turned on anymore. I'm not rich. I was still giddy about saving a dozen dollars during black Friday sales.

I understand basic elements of circuits. So I want to fix it myself.

I suspect that the battery is down. And I suspect some excessive current protection mechanism was triggered. The battery can be replaced easily.

So my question is that what might have been broken, and how to fix them.

If you can kindly share your knowledge, I will be grateful.

I solved my own problem.
If you have similar problem please

Try a reset, press the top and and home button at the same time

I'm grateful that this forum gave me some hope.

[zerozeroseven11]

hello every one.i have iphone 6 plus .i changed display .but after that no phone power on only vibrate 4 sec and vibrate 4sec..please help me any advanced person.

PLEASE UNTIL NOT GET ANY SOLUTION..ANY ADVANCED PAERSON PLEASE.

[robraiser]

I changed the screen on an iphone 6 snd after the wifi signal strength dropped significantly!! Any ideas ?? I tried with different screen after and old one too same....what could ve happened pls help!!! Thank you!!!

[Dzelailai]

I have iphone6 water damage.It was dead when brought to me and can now ON after services the panel.Now the problem is that the screen can not touch. I tested it with many screens still not touch.I think the problem is from panel.
Please help what else to do to make the screen TOUCH.
Thanks in advance.

[zerrro]

Hi to all, This is my first thread here, I have a iphone 4s when i plug in the charger is working fine a little heat above the sim slot ,show it is charging ,has signal ,at the first look it all right but the ios it is a little frozy and when i remove the charger after 1-2 sec Bang ,shuts off and when i press power button show no battery ,i have tried a new battery same issue ,i have restored to factory settings (no error) , set up as a new iphone same issue ,for sure its a hardware problem ,i have looked at the motherboard with shields off and i don`t see water/resin signs or else,i think that heat above the sim slot is the probblem ,so can anyone please tell me where to begin or another ideea ? Thanks !

[a2033335900]

iphone 6s no signs of liquid damage of any kind , but still wont turn on or recognized by itunes , completely dead .
tried power + home botton
charged for couple hrs
connect to itunes no response
any suggestions !