n95 8gig china dead after format pls help infinity team

[cobratoo]

before the n95 is working, the only problem is the on and off signal

so i dicided to change imei but still no luck, then i decided to format it, the format is a success. but the phone doesnt power on.

i did not buckup the firmware

how can i fixe this infinity team pls help

hers the complete log

COM9 [VCP0] selected
module v3.24
Device: Autodetect 6205-6239 NOR
Checking data, wait...
advanced flash detection enabled
Action: reset settings ("format ffs")
Do you want to make ffs/eeprom backup before format ?
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:0B03:0006
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
detecting chip #02 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
detecting chip #03 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
number of flash chip/regions detected: 04/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
device parameters detection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
otp offset: 00000000
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (04)
TCL-ID is absent
====================
New firmware found (v.3.24, database date: 01.10.2010):
HX695_HW.M684_SET_NS5_AR7_V3_0RTEST--090115.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
rom info ver: 04
sw version: HX695_HW.M684_SET_NS5_AR7_V3_0RTEST--090115.BIN
project-id: M684_SET_NS5_AR7_V3.0RTEST, 00000000
code offset: 00000000
ffs offset/size [01]: 00E00000/00200000
rom info structure: [standard] type (04)
TCL-ID is absent
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area [00000000]: 00080000-00FFFFFF...
Can't detect ffs/eeprom area
Do you want to use standard ffs/eeprom address: 00E00000 ?

If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs/eeprom address selected by user
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
firmware area: 00000000-00DFFFFF
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
flash: EC257E25082501:18E59F00000000
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
Write Done
====> Finalization ...
ffs formatting...
flash: EC257E25082501:18E59F00000000
Finalization Done
Finished, time used: 3 min 11 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !







hope you can help me with this

[cobratoo]

pls help infinity team

[rk19801]

Again format with safe mode........may be help....post result

[cobratoo]

how can i format in safe mode? the fone is already dead now

[InfinityHelp]

hello!

flash with this:
flashfiles/ChineseMiracle/_MT6205-MT6227/HX695_HW.M684_M5_NS5_AR5_V3_0OTEST--081108_16m_En_Fr_Farsi_Pt_Ar.B0M.bin


or with any other starting by "HX695_HW.M684" and containing needed languages

[cobratoo]

Originally Posted by InfinityHelp

hello!

flash with this:
flashfiles/ChineseMiracle/_MT6205-MT6227/HX695_HW.M684_M5_NS5_AR5_V3_0OTEST--081108_16m_En_Fr_Farsi_Pt_Ar.B0M.bin


or with any other starting by "HX695_HW.M684" and containing needed languages

sir, i flashed it with HX695_HW.M684_M5_NS5_AR5_V3_0OTEST--081108_16m_En_Fr_Farsi_Pt_Ar.B0M.bin


but the result is white screen

anymore firmware you can suggest sir???

[InfinityHelp]

hello!

if you will re-read my post:

flash by any other starting by "HX695_HW.M684" and containing needed languages

[jawad_anis]

Originally Posted by InfinityHelp

hello!

if you will re-read my post:

flash by any other starting by "HX695_HW.M684" and containing needed languages

HX684_GEMINI_07B_HW.CY684_AR9_NT57_B2_V1_9ETEST--091117__firmware_part_1_of_1...
i need this file urgent pls help mee

[jawad_anis]

Originally Posted by cobratoo

sir, i flashed it with HX695_HW.M684_M5_NS5_AR5_V3_0OTEST--081108_16m_En_Fr_Farsi_Pt_Ar.B0M.bin


but the result is white screen

anymore firmware you can suggest sir???

same case is with mee also

[PASSIONATE_BOYS]

Originally Posted by jawad_anis

same case is with mee also

You need to write the exact/matching firmware which was previously in phone, if same firmware is not present on support search for same working model and read full flash and then write it to your faulty phone.

Wr

[jawad_anis]

Originally Posted by PASSIONATE_BOYS

You need to write the exact/matching firmware which was previously in phone, if same firmware is not present on support search for same working model and read full flash and then write it to your faulty phone.

Wr

yh ur right but the basic problem is in china mobile if u have 10 same mobile ph that is not compolsary tha every ph has same version or same hard ware like orignal phones

[PASSIONATE_BOYS]

Originally Posted by jawad_anis

yh ur right but the basic problem is in china mobile if u have 10 same mobile ph that is not compolsary tha every ph has same version or same hard ware like orignal phones

That's why I told to read from good working phone and same model, now that's common sense to look and find the model is same which you want or not, and by reading details with chinese miracle you can find firmware version.

BTW if you find one upload the read flash file for infinity team so that other users can also get it.
Wr.