5660 problem :) help thanks :) - GSM-Forum

TRABEL · 12-18-2012, 16:27

Selected Resurrector: [Samsung S5660 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x503C10E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x000000080000

tested deferent speeds and about 30 times same results
phone is new

**legija** · 12-18-2012, 19:44

Holding power button might help.

TRABEL · 12-19-2012, 07:56

Quote:

Originally Posted by legija

Holding power button might help.

well

thats what did the trick !!
thanks
you should add this tip to the help file

TRABEL · 12-19-2012, 08:06

hmmm
o.k
phone enter download , and emergency download mode
but pc is not recodnize it....
can i flash fully the phone with original samsung files with riff ?

btw phone is heating on download mode .... ( its a new phone no damage or water)

BABAK NURI · 12-19-2012, 09:29

Hi TRABEL

No,You Can't Flash Org Firmware By RIFFBOX,But You Can Use Full Dump

TRABEL · 12-19-2012, 15:05

Quote:

Originally Posted by BABAK NURI

Hi TRABEL

No,You Can't Flash Org Firmware By RIFFBOX,But You Can Use Full Dump

thanks
where can i get full dump of 5660 for riff ?

and this problem of connection to pc after jtag is it knowen ?

12-18-2012, 16:27	#1 (permalink)
TRABEL No Life Poster Join Date: Feb 2003 Location: on the Moon ;) Age: 47 Posts: 2,797 Member: 21937 Status: Offline Thanks Meter: 279	5660 problem :) help thanks :) Selected Resurrector: [Samsung S5660 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x503C10E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is 1 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Flashing the dead body... ERROR: Timeout while waiting for DCC Loader response. Trying to recover...FAILED ERROR: Failed due to multiple communication errors. Terminating at 0x000000080000 tested deferent speeds and about 30 times same results phone is new

12-18-2012, 19:44	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Holding power button might help.

12-19-2012, 08:06	#4 (permalink)
TRABEL No Life Poster Join Date: Feb 2003 Location: on the Moon ;) Age: 47 Posts: 2,797 Member: 21937 Status: Offline Thanks Meter: 279	hmmm o.k phone enter download , and emergency download mode but pc is not recodnize it.... can i flash fully the phone with original samsung files with riff ? btw phone is heating on download mode .... ( its a new phone no damage or water)

12-19-2012, 09:29	#5 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi TRABEL No,You Can't Flash Org Firmware By RIFFBOX,But You Can Use Full Dump