after jtag phone bricked

[vartom]

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.51
Selected Resurrector: [HTC Desire X (PM6610000) V1.0.4841.63397]

Connecting to the dead body...OK
Detected dead body ID: 0x007700E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (HYNIX, 0x0000E7000000 Bytes = 3.61 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (HYNIX, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...OK
Resurrection complete!



not bot not work

[~AKSingh~]

After resurrection phone bricked ..plz tell us what was the reason for resurrection
need more info and logs so that we can help you accurately

br,

[vartom]

[20.09.2013 20:33:40] [START OPERATION_ID = RESURRECT]
[20.09.2013 20:37:06] Open serial port...OK
[20.09.2013 20:37:06] Connecting to the RIFF Box...OK
[20.09.2013 20:37:06] Firmware Version: 1.37, JTAG Manager Version: 1.51
[20.09.2013 20:37:06] Selected Resurrector: [HTC Desire X (PM6610000) V1.0.4841.63397]
[20.09.2013 20:37:06]
[20.09.2013 20:37:06] Connecting to the dead body...OK
[20.09.2013 20:37:06] Detected dead body ID: 0x007700E1 - CORRECT!
[20.09.2013 20:37:06] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
[20.09.2013 20:37:06] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[20.09.2013 20:37:06]
[20.09.2013 20:37:06] Resurrection sequence started.
[20.09.2013 20:37:06] Establish communication with the phone...OK
[20.09.2013 20:37:06] Initializing internal hardware configuration...OK
[20.09.2013 20:37:06] Uploading resurrector data into memory...OK
[20.09.2013 20:37:06] Starting communication with resurrector...OK
[20.09.2013 20:37:06]
[20.09.2013 20:37:06] Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (HYNIX, 0x0000E7000000 Bytes = 3.61 GB)
[20.09.2013 20:37:06] Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (HYNIX, 0x000000200000 Bytes = 2.00 MB)
[20.09.2013 20:37:06]
[20.09.2013 20:37:06] Flashing the dead body...OK
[20.09.2013 20:37:06] Resurrection complete!
[20.09.2013 20:37:06] [FINISH OPERATION_ID = RESURRECT]

full log . resurrection ok. after resurrection phone not open not bot mode

[BABAK NURI]

Hi
We see your log in first post,no need post another

But,Please Tell Me About Phone History? Also Tell Me About First Condition of Your Phone....?
Your Phone is OFF Before Resurrect? Or Phone is On But After Resurrect,Is OFF..?

Thanks