ı am goint to pessimist. reason htc phones - GSM-Forum

RamazanUsta · 04-02-2012, 16:29

if ı do one htc phone repair via RİFF box, ı will be happy forever

(((

ı have one htc again no succes

who can help me.

Rocker Team hello
ı dont have any problem all samsung phones but htc's kiling me

Connecting to the RIFF Box...OK
Firmware Version: 1.31, JTAG Manager Version: 1.41
Selected Resurrector: [HTC Sensation (PG58130) V1.0.4475.11921]

Connecting to the dead body...OK
Detected dead body ID: 0x104210E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 100 kHz]

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x42): Communication is not established. Terminating.

**legija** · 04-02-2012, 16:34

Either You soldered it very badly, or there is some issue with 20 pin ribbon cable.

From log i could say something wrong with NRST wire, or GND.

RamazanUsta · 04-02-2012, 16:46

you are rigt legija ı use normal cable maybe cable has problem. ı dont have jtag set. what you have advice for cable ı will try again different

RamazanUsta · 04-02-2012, 16:51

question ? can ı use computer good quality ide cable

mobile. · 04-02-2012, 23:34

Copper wire or old IDE cable :-)

Sent from my GT-I9100P using Tapatalk

RamazanUsta · 04-19-2012, 13:59

thanks legija ı use just short cable all ok. ı have done already 5 pieces htc and i am happy anymore

04-02-2012, 16:29	#1 (permalink)
RamazanUsta Freak Poster Join Date: Jul 2005 Age: 49 Posts: 188 Member: 159411 Status: Offline Thanks Meter: 8	ı am goint to pessimist. reason htc phones if ı do one htc phone repair via RİFF box, ı will be happy forever ((( ı have one htc again no succes who can help me. Rocker Team hello ı dont have any problem all samsung phones but htc's kiling me Connecting to the RIFF Box...OK Firmware Version: 1.31, JTAG Manager Version: 1.41 Selected Resurrector: [HTC Sensation (PG58130) V1.0.4475.11921] Connecting to the dead body...OK Detected dead body ID: 0x104210E1 - CORRECT! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 100 kHz] Resurrection sequence started. Establish communication with the phone...FAILED ERROR(0x42): Communication is not established. Terminating.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29
Copy from one 6110 to another	Leif Nielsen	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-10-1999 22:36

04-02-2012, 16:34	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Either You soldered it very badly, or there is some issue with 20 pin ribbon cable. From log i could say something wrong with NRST wire, or GND.

04-02-2012, 16:46	#3 (permalink)
RamazanUsta Freak Poster Join Date: Jul 2005 Age: 49 Posts: 188 Member: 159411 Status: Offline Thanks Meter: 8	you are rigt legija ı use normal cable maybe cable has problem. ı dont have jtag set. what you have advice for cable ı will try again different

04-02-2012, 16:51	#4 (permalink)
RamazanUsta Freak Poster Join Date: Jul 2005 Age: 49 Posts: 188 Member: 159411 Status: Offline Thanks Meter: 8	question ? can ı use computer good quality ide cable

04-02-2012, 23:34	#5 (permalink)
mobile. Freak Poster Join Date: Nov 2010 Location: UK Posts: 449 Member: 1454100 Status: Offline Thanks Meter: 28	Copper wire or old IDE cable :-) Sent from my GT-I9100P using Tapatalk

04-19-2012, 13:59	#6 (permalink)
RamazanUsta Freak Poster Join Date: Jul 2005 Age: 49 Posts: 188 Member: 159411 Status: Offline Thanks Meter: 8	thanks legija ı use just short cable all ok. ı have done already 5 pieces htc and i am happy anymore