Another i8160p with problems! - GSM-Forum

penewan · 03-18-2014, 12:58

Hi!

Thanks for your time!

I have a problem with Samsung i8160p, I've installed the drivers and I soldered the wires correct.

I try all JTAG TCK Speed and all RTCK samples without succesfull result.

There's the log.

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung I8160P V1.0.4899.57609]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.

**legija** · 03-18-2014, 14:46

It could be dead eMMC.
What's the phone history ?

penewan · 03-22-2014, 11:59

The phone was turned off and not turned on again.

Tomorrow I upload a picture.

penewan · 03-31-2014, 14:07

imageshackdotcom/i/n171elj

Sorry for my later reply.

03-18-2014, 14:46	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	It could be dead eMMC. What's the phone history ?

03-22-2014, 11:59	#3 (permalink)
penewan Junior Member Join Date: Nov 2013 Posts: 4 Member: 2072712 Status: Offline Thanks Meter: 0	The phone was turned off and not turned on again. Tomorrow I upload a picture.

03-31-2014, 14:07	#4 (permalink)
penewan Junior Member Join Date: Nov 2013 Posts: 4 Member: 2072712 Status: Offline Thanks Meter: 0	imageshackdotcom/i/n171elj Sorry for my later reply.