another pc not done again !!!

[dapinderjit]

wave 2 dead after rescurrtion :

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Samsung S8530 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 6 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 4KB

Flashing the dead body...OK
Resurrection complete!

what can be done plzzz riff team wake up !!!

[dapinderjit]

Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 6 MHz
Settings Code: 0x25010A00000000000000000020000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)

Writting FLASH1 memory from 0x000000000000 to 0x00001FFFFFFF
Completed in 00:36:01.781 (Average Transfer Rate: 250.10 kB/s)

wrote a file again the phone is dead ??

[LoveLess]

Originally Posted by dapinderjit

Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 6 MHz
Settings Code: 0x25010A00000000000000000020000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)

Writting FLASH1 memory from 0x000000000000 to 0x00001FFFFFFF
Completed in 00:36:01.781 (Average Transfer Rate: 250.10 kB/s)

wrote a file again the phone is dead ??

hi..

for bada devices u dont need to write full dump.. only erase it and resserction then FORCE the dl mode.. (sometimes device goes to DL mode w\o screen i mean black screen but it is on the dl mode.plug the usb cable pc can detect it.if not success dont unplug the jtag cables from device and try to enter DL mode) and flash with multiloader or samsung boxes.. then repair imei..