Samsung i8510 PDA + Modem repair here !

[A-H-T]

another solution from Elco "not for sale" can repair I8510 dead .

can RIFF repair this phone ? coz he is chalenging that its not easy and cant be repaired by others but him

with best regards,

[legija]

Here is how You can fix i8510 PDA part using RIFF Box and CMM script.

- Set model to Samsung i550 PDA
- Connect i8510 PDA pins to RIFF JTAG Box
- Start the JTAG Manager
- Switch to DCC Read/Write TAB
- Select ROM1
- Set the address to "0x00000000"
- Set the Data Length to "0x00008000"
- Click "Read mem", when finished move to JTAG TAB
- Click "Connect&Get ID"
- Click HALT
- Click Execute CMM Script, and select "primera.cmm"
- Press "Run Script" button
- Your phone PDA will be updated with boot files

Now, disconnect cables and enter PDA download mode using 1+4+power buttons, reflash the PDA with original flasher.

Here is CMM package.

[konaku]

SAMSUNG i8510 hang on logo , after try to resurection m here is log:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [Samsung i8510 PDA]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3602F - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0040 (256MB)
Flashing the dead body...
ERROR: No response from the ramloader. Terminating at 0x000C0000

did RIFF has any support site , when I will be download new oryginal flash files ?

[legija]

Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Change this to lower value and retry.

[konaku]

Originally Posted by legija

Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Change this to lower value and retry.

did RIFF has any support site , when I will be download new oryginal flash files ?

[legija]

Hi,
No, we can not provide any official firmwares for any mobile phone brand.
You need to get files via some other channels.

[jhongtech]

how to repair i8510 phone part by using cmm files...

[deepakgarg]

http://forum.gsmhosting.com/vbb/6303940-post2.html
this might help

[jhongtech]

that is for pda part what i need is for phone part

becoz i tried already the resurrection procedure both phone and pda and complete flashing still my i8510 not booting

[deepakgarg]

that might be a case of hardware fault...may be

[jhalir]

I have some question.
In manual for repair I8510 is next clause:
Solder the PS_HOLD signal to the MSM's VCC (2.6V);

- can somebody say me what is "MSM's VCC (2.6V)"?
Where i can get this signal, or i can use external stable source?
- VCC pin from RIFF box i may connect to pin 8 on phoneboard and also to pshold?

maybe this is stupid question, but i am already confused.
thx for response

[Sigma]

yes / yes .

[jhalir]

Ok, thx for your reply, now please correct my picture and say me , may this work correctly?

[czzfd]

thank U..................

[digicellcelular]

Hello friends, I need "Resurretion" one Samsung i8510, however, presents error in process:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Resurrector: [Samsung i8510 Modem]

Connecting to the dead body...ERROR
ERROR: The RTCK Signal does not respond.

What solluction in this case?
Thank´s Riff Team!