c6602 dead boot - GSM-Forum

rubymunna · 06-18-2014, 19:49

Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [XPERIA Z C6602 V1.04 by <legija>]

Connecting to the dead body...OK
Detected dead body ID: 0x107190E1
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x20010000000000040000000001400000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Read/Write memory failed during H/W Init.

rubymunna · 06-18-2014, 22:05

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [XPERIA Z C6602 V1.04 by <legija>]

Connecting to the dead body...OK
Detected dead body ID: 0x107190E1
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: RAM memory selftest failed.

rubymunna · 06-18-2014, 23:02

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [XPERIA Z C6602 V1.04 by <legija>]

Connecting to the dead body...OK
Detected dead body ID: 0x107190E1ERROR
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x0003A3E00000 Bytes = 14.56 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...OK
Resurrection complete!

dont alive yet...please help me

unlok_man · 06-19-2014, 05:53

Quote:

Originally Posted by rubymunna

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [XPERIA Z C6602 V1.04 by <legija>]

Connecting to the dead body...OK
Detected dead body ID: 0x107190E1ERROR
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x0003A3E00000 Bytes = 14.56 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...OK
Resurrection complete!

dont alive yet...please help me

hello friend, after doing the resurrection
got to flash the phone

rubymunna · 06-19-2014, 10:40

Can't flash.
I restore other Ta partition. That dead. PC detect on flash mode but can't flash any version!

Sent from my iPhone using Tapatalk

hassan1975 · 11-15-2014, 19:07

Quote:

Originally Posted by rubymunna

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [XPERIA Z C6602 V1.04 by <legija>]

Connecting to the dead body...OK
Detected dead body ID: 0x107190E1ERROR
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x0003A3E00000 Bytes = 14.56 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...OK
Resurrection complete!

dont alive yet...please help me

have same problem

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [XPERIA Z C6602 V1.04 by <legija>]

Connecting to the dead body...OK
Detected dead body ID: 0x107190E1
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0011/0x0100 (016G93, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0011/0x0100 (016G93, 0x000000400000 Bytes = 4.00 MB)

Flashing the dead body...OK
Resurrection complete!

but stell daed

rubymunna · 11-15-2014, 20:25

bro u can try with s1tool with testpoint...u can find on xda
i did it alive
if u need help...pm me

syandi · 11-17-2014, 14:10

just in this forum and u will see this

hassan1975 · 11-17-2014, 19:52

i try but it give me

PHONE NOT SUPPORTED IN THIS MODE
Elapsed:48 secs.

hassan1975 · 11-24-2014, 19:30

Quote:

Originally Posted by rubymunna

bro u can try with s1tool with testpoint...u can find on xda
i did it alive
if u need help...pm me

BRO
afer this post u did not cam online

hassan1975 · 11-29-2014, 18:48

i still wait cam online

thx

06-18-2014, 19:49	#1 (permalink)
rubymunna Freak Poster Join Date: Jul 2007 Location: Yangon Posts: 362 Member: 550683 Status: Offline Sonork: 100.1649601 Thanks Meter: 43	c6602 dead boot Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Package: [XPERIA Z C6602 V1.04 by <legija>] Connecting to the dead body...OK Detected dead body ID: 0x107190E1 Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Settings Code: 0x20010000000000040000000001400000 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...FAILED ERROR: Read/Write memory failed during H/W Init.

06-18-2014, 22:05	#2 (permalink)
rubymunna Freak Poster Join Date: Jul 2007 Location: Yangon Posts: 362 Member: 550683 Status: Offline Sonork: 100.1649601 Thanks Meter: 43	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Package: [XPERIA Z C6602 V1.04 by <legija>] Connecting to the dead body...OK Detected dead body ID: 0x107190E1 Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...FAILED ERROR: RAM memory selftest failed.

06-18-2014, 23:02	#3 (permalink)
rubymunna Freak Poster Join Date: Jul 2007 Location: Yangon Posts: 362 Member: 550683 Status: Offline Sonork: 100.1649601 Thanks Meter: 43	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Package: [XPERIA Z C6602 V1.04 by <legija>] Connecting to the dead body...OK Detected dead body ID: 0x107190E1ERROR Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x0003A3E00000 Bytes = 14.56 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MAG2GA, 0x000000200000 Bytes = 2.00 MB) Flashing the dead body...OK Resurrection complete! dont alive yet...please help me

06-19-2014, 10:40	#5 (permalink)
rubymunna Freak Poster Join Date: Jul 2007 Location: Yangon Posts: 362 Member: 550683 Status: Offline Sonork: 100.1649601 Thanks Meter: 43	Can't flash. I restore other Ta partition. That dead. PC detect on flash mode but can't flash any version! Sent from my iPhone using Tapatalk

11-15-2014, 20:25	#7 (permalink)
rubymunna Freak Poster Join Date: Jul 2007 Location: Yangon Posts: 362 Member: 550683 Status: Offline Sonork: 100.1649601 Thanks Meter: 43	bro u can try with s1tool with testpoint...u can find on xda i did it alive if u need help...pm me

11-17-2014, 14:10	#8 (permalink)
syandi Freak Poster Join Date: Oct 2011 Age: 39 Posts: 324 Member: 1675927 Status: Offline Sonork: syandi_cell Thanks Meter: 25	just in this forum and u will see this

11-17-2014, 19:52	#9 (permalink)
hassan1975 No Life Poster Join Date: May 2003 Posts: 1,312 Member: 28819 Status: Offline Thanks Meter: 222	i try but it give me PHONE NOT SUPPORTED IN THIS MODE Elapsed:48 secs.

11-29-2014, 18:48	#11 (permalink)
hassan1975 No Life Poster Join Date: May 2003 Posts: 1,312 Member: 28819 Status: Offline Thanks Meter: 222	i still wait cam online thx