can supporter help me about my dead boot i9100...?

[mobihard]

after repaire 1st one icant se download moad_i use ''initiate download mode'' and after repaire its stop whien write spl error_i use second mesode ''resurrect by flashing spl'' shown me this error_Although i've use this mesod by mr.leijga

http://forum.gsmhosting.com/vbb/f634...ution-1508808/

plz supporter help me althoug this phone alredy worked put i get out caple when i flashed it....thnx



Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.33, JTAG Manager Version: 1.44
Selected Resurrector: [Samsung i9100 V1.0.4582.4854]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (VYL00M, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0001 (VYL00M, 0x000000080000 Bytes = 0.50 MB)

Flashing the dead body...
WARNING: Programming Error (0x25) at 0x000001800000 is handled as Cut Excess.
ERROR: DCC Loader has reported Error Code = 0x3E (0x007FFF <> 0x010000)



BR
RAMY