connecting t999l says wrong family....? - GSM-Forum

imchuck · 10-02-2014, 07:10

riff box with jig, external power supply, usb to pc.. . board connected to jig, plug usb from pc to board, enable external power supply, connecting to dead body... ok .. . detected dead body id.....WRONG!! Error current detected id does not belong to T999L family...???

BABAK NURI · 10-04-2014, 09:54

Hi
Please goto "Box Services/Advanced Setting" Then Select "Disable IS Code Check"
And Try Resurrect Againg

Thanks

imchuck · 10-04-2014, 23:06

Connecting to the dead body...OK
Detected dead body ID: 0x706B50E1 - IGNORED!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 8 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0011/0x0100 (016GE2, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0011/0x0100 (016GE2, 0x000000400000 Bytes = 4.00 MB)

Flashing the dead body...
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x0003AB3FBE00

BABAK NURI · 10-06-2014, 09:41

Hi
Please Read :RIFF JTAG Box FAQ - ERROR: Failed due to multiple communication errors.

imchuck · 10-08-2014, 00:14

Yes sir i got it already, trace on connector on board was split. thanks for reply tho. Was driving me crazy

10-02-2014, 07:10	#1 (permalink)
imchuck Crazy Poster Join Date: Mar 2014 Posts: 51 Member: 2147882 Status: Offline Thanks Meter: 0	connecting t999l says wrong family....? riff box with jig, external power supply, usb to pc.. . board connected to jig, plug usb from pc to board, enable external power supply, connecting to dead body... ok .. . detected dead body id.....WRONG!! Error current detected id does not belong to T999L family...???

10-04-2014, 09:54	#2 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi Please goto "Box Services/Advanced Setting" Then Select "Disable IS Code Check" And Try Resurrect Againg Thanks

10-04-2014, 23:06	#3 (permalink)
imchuck Crazy Poster Join Date: Mar 2014 Posts: 51 Member: 2147882 Status: Offline Thanks Meter: 0	Connecting to the dead body...OK Detected dead body ID: 0x706B50E1 - IGNORED! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 8 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0011/0x0100 (016GE2, 0x0003AB400000 Bytes = 14.68 GB) Detected an Initialized FLASH2 Chip, ID: 0x0011/0x0100 (016GE2, 0x000000400000 Bytes = 4.00 MB) Flashing the dead body... ERROR: Timeout while waiting for DCC Loader response. Trying to recover...FAILED ERROR: Failed due to multiple communication errors. Terminating at 0x0003AB3FBE00

10-06-2014, 09:41	#4 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi Please Read :RIFF JTAG Box FAQ - ERROR: Failed due to multiple communication errors.

10-08-2014, 00:14	#5 (permalink)
imchuck Crazy Poster Join Date: Mar 2014 Posts: 51 Member: 2147882 Status: Offline Thanks Meter: 0	Yes sir i got it already, trace on connector on board was split. thanks for reply tho. Was driving me crazy