connection error Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.51 (RIFFBOX1), JTAG Manager Version: 1.81 Selected Resurrector: [Samsung I8262 ISP V1.0.6607.34408, <JTAG>, 1 Bit Bus Width (DAT0)] Connecting to the SD/eMMC Card...ERROR Set I/O Voltage reads as 1.80V, SD_CLK Frequency is 1 MHz Connecting to the SD/eMMC Card Failed (ERR[0075], POS[000B]) how to solve |
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.51 (RIFFBOX1), JTAG Manager Version: 1.81 Selected Resurrector: [Samsung I9100 ISP V1.0.6656.39764, <RJ-45>, 1 Bit Bus Width (DAT0)] Connecting to the SD/eMMC Card...ERROR Set I/O Voltage reads as 1.57V, SD_CLK Frequency is 649 KHz Connecting to the SD/eMMC Card Failed (ERR[0071], POS[0001]) |
Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.51 (RIFFBOX1), JTAG Manager Version: 1.81 Selected Resurrector: [Samsung I9100 ISP V1.0.6656.39764, <RJ-45>, 1 Bit Bus Width (DAT0)] Connecting to the SD/eMMC Card...ERROR Set I/O Voltage reads as 1.59V, SD_CLK Frequency is 649 KHz Connecting to the SD/eMMC Card Failed (ERR[0075], POS[000A]) |
All times are GMT +1. The time now is 12:25. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -