Damaged box? - GSM-Forum

Burebista · 08-22-2014, 18:09

Hi,
I've encountered a problem with my box;
when I try to resurrect or unlock I'm receiving errors like this one:

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [HTC Desire X (PM6610000) V1.0.4841.63397]
 Connecting to the dead body...
ERROR: Set I/O Voltage to 2,60V failed. Real reading is 3,32V

Also I had an villec2 to repair boot and one to unlock and I couldn't proceed with them.
What's the problem?
Is there any controller that is providing Vref into the box and is damaged?
Wich one is that to replace it?
Thanks!

toninhosantos · 08-22-2014, 20:08

update your firmware box, in tab box service

Burebista · 08-22-2014, 22:49

Quote:

Originally Posted by toninhosantos

update your firmware box, in tab box service

I've already updated it's firmware a long time ago.

omi17 · 08-23-2014, 11:17

Quote:

Originally Posted by Burebista

I've already updated it's firmware "a long time ago."

Hii,
Update it now!!!

__________________
Best Regards Omi17

smarttimes · 08-26-2014, 05:56

It is NOT a firmware problem. The conection with the device is the reason this error occurs.
Re-do wiring, use battery USB and ......ground the device!

08-22-2014, 18:09	#1 (permalink)
Burebista No Life Poster Join Date: Feb 2006 Location: In a point from Universe! Age: 40 Posts: 1,633 Member: 235325 Status: Offline Sonork: 100.1593552 Thanks Meter: 523	Damaged box? Hi, I've encountered a problem with my box; when I try to resurrect or unlock I'm receiving errors like this one: Code: Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [HTC Desire X (PM6610000) V1.0.4841.63397] Connecting to the dead body... ERROR: Set I/O Voltage to 2,60V failed. Real reading is 3,32V Also I had an villec2 to repair boot and one to unlock and I couldn't proceed with them. What's the problem? Is there any controller that is providing Vref into the box and is damaged? Wich one is that to replace it? Thanks!

08-22-2014, 20:08	#2 (permalink)
toninhosantos No Life Poster Join Date: Jun 2010 Location: Xique-Xique-Bahia, Brasil Age: 46 Posts: 904 Member: 1320000 Status: Offline Sonork: 100.1667898 Thanks Meter: 272	update your firmware box, in tab box service

08-26-2014, 05:56	#5 (permalink)
smarttimes Freak Poster Join Date: Jun 2012 Posts: 109 Member: 1772418 Status: Offline Thanks Meter: 7	It is NOT a firmware problem. The conection with the device is the reason this error occurs. Re-do wiring, use battery USB and ......ground the device!