dead HTC MOZART

[deco_soft]

Hello RIFF BOX Team!

I have a dead HTC MOZART and when I make resurrection I will get this:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [HTC Mozart V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.99V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x66BC (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 4KB

Flashing the dead body...
WARNING: Programming Error (0x25) at 0x000000040000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000050000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000060000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000070000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000080000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000090000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000000A0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000000B0000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x0000000C0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000000D0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000000E0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000000F0000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000100000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000110000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000120000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000130000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000140000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000150000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000160000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000170000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000180000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000190000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000001A0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000001B0000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x0000001C0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000001D0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000001E0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000001F0000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000200000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000210000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000220000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000230000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000240000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000250000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000260000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000270000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000400000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000410000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000420000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000430000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000440000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000450000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000460000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000470000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000480000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000490000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000004A0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000004B0000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x0000004C0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000004D0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000004E0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000004F0000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000500000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000510000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000520000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000530000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000540000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000550000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000560000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000570000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000580000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000590000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000005A0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000005B0000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x0000005C0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000005D0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000005E0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000005F0000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000600000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000610000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000620000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000630000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000640000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000650000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000660000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000670000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000680000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000690000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000006A0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000006B0000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x0000006C0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000006D0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000006E0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000006F0000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000700000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000710000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000720000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000730000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000740000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000750000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000760000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000770000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000780000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000790000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000007A0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000007B0000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x0000007C0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000007D0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000007E0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000007F0000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000800000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000810000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000820000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000830000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000840000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000850000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000860000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000870000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x000000880000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000890000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000008A0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000008B0000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x0000008C0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000008D0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x0000008E0000 is handled as Cut Excess.
ERROR: Forced to Terminate. Terminated at 0x0000008F0000

Any idea, is it a hardware problem?

Thanks and waiting for your answer.