Droid Incredible JTAG H/W init issue - GSM-Forum

Droid1230 · 11-01-2011, 19:32

Trying to JTAG a Droid Incredible and keep getting error when reading memory. 1. I connect and get ID - OK - current .17
2. I halt the target - OK - current drops to .05
3. DCC read/write, Auto Full Flash Size, click read memory and device current drops to 0 (device turns off)

I had a successful read once and now I cannot get another one. Voltage is set to 3.0 on power supply but I tried it with the USB cable instead and got the same error... any suggestions?

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.27, JTAG Manager Version: 1.29
Selected Resurrector: [HTC Incredible C]

Connecting to the dead body...OK
Detected dead body ID: 0x202800E1 - CORRECT!
Set I/O Voltage reads as 2.99V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Read/Write memory failed during H/W Init.

**legija** · 11-01-2011, 19:52

NRST pin not connected.

connexion2005 · 11-01-2011, 20:26

NRST or bad grounding.

Droid1230 · 11-01-2011, 21:27

I have tried two different Incredibles now and they both do the same thing. Can it be something else?

Droid1230 · 11-01-2011, 21:29

Also, when I tried the second Incredible it would connect just fine but fail anytime I tried a memory read. This one had a boot loop issue so I was attempting to resurrect and it failed at 70%. Now I can barely get .05 for current and it won't let me resurrect or memory dump.

Droid1230 · 11-01-2011, 21:48

I figured out that if I leave the power supply connected and the USB cable at the same time it works. Is this normal?

Thanks guys for your input I'm obviously new at this.

Also, will the resurrect solve the boot loop issues or will I have to flash a new ROM?

alex89 · 03-22-2012, 07:10

mine doesnt start after resurrectionconect to pc and only says qualcomm cdma

11-01-2011, 19:32	#1 (permalink)
Droid1230 Junior Member Join Date: Dec 2010 Posts: 10 Member: 1466434 Status: Offline Thanks Meter: 0	Droid Incredible JTAG H/W init issue Trying to JTAG a Droid Incredible and keep getting error when reading memory. 1. I connect and get ID - OK - current .17 2. I halt the target - OK - current drops to .05 3. DCC read/write, Auto Full Flash Size, click read memory and device current drops to 0 (device turns off) I had a successful read once and now I cannot get another one. Voltage is set to 3.0 on power supply but I tried it with the USB cable instead and got the same error... any suggestions? Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.27, JTAG Manager Version: 1.29 Selected Resurrector: [HTC Incredible C] Connecting to the dead body...OK Detected dead body ID: 0x202800E1 - CORRECT! Set I/O Voltage reads as 2.99V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...FAILED ERROR: Read/Write memory failed during H/W Init.

11-01-2011, 21:27	#4 (permalink)
Droid1230 Junior Member Join Date: Dec 2010 Posts: 10 Member: 1466434 Status: Offline Thanks Meter: 0	Anything else? I have tried two different Incredibles now and they both do the same thing. Can it be something else?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 8210 5.28 Boot Init Error	Fish Ant	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	11-16-2001 01:46
Boot init error, bad crc???	Unlimited Unlocking	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	10-10-2001 09:53
Flash loader init Error ! PLEASE HELP ME !	FreeGSM Team	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	9	06-18-2001 19:42
Boot Init Error! (Bad CRC)	mr_pheus	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	06-16-2001 20:50
Mti init failed	dogbreak	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-22-1999 01:28

11-01-2011, 19:52	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	NRST pin not connected.

11-01-2011, 20:26	#3 (permalink)
connexion2005 Freak Poster Join Date: Jan 2011 Posts: 355 Member: 1501506 Status: Offline Thanks Meter: 47	NRST or bad grounding.

11-01-2011, 21:29	#5 (permalink)
Droid1230 Junior Member Join Date: Dec 2010 Posts: 10 Member: 1466434 Status: Offline Thanks Meter: 0	Also, when I tried the second Incredible it would connect just fine but fail anytime I tried a memory read. This one had a boot loop issue so I was attempting to resurrect and it failed at 70%. Now I can barely get .05 for current and it won't let me resurrect or memory dump.

11-01-2011, 21:48	#6 (permalink)
Droid1230 Junior Member Join Date: Dec 2010 Posts: 10 Member: 1466434 Status: Offline Thanks Meter: 0	I figured out that if I leave the power supply connected and the USB cable at the same time it works. Is this normal? Thanks guys for your input I'm obviously new at this. Also, will the resurrect solve the boot loop issues or will I have to flash a new ROM?

03-22-2012, 07:10	#7 (permalink)
alex89 Insane Poster Join Date: Jul 2006 Posts: 88 Member: 314358 Status: Offline Thanks Meter: 6	mine doesnt start after resurrectionconect to pc and only says qualcomm cdma