12-12-2011, 12:13
|
#1 (permalink)
|
No Life Poster
Join Date: May 2007 Age: 37
Posts: 1,579
Member: 500858
Status: Offline
Sonork: 1589054 Thanks Meter: 392 | E15 (x8) successfully Unlock And Also successfully Repair No Network Problem Quote:
What settings are best for SEMC QC phones ?
| - Quote:
RTCK Sampling 8MHz
- External power + USB Cable
| Unlock Log Quote:
[12/12/2011 01:52:31 PM] [START OPERATION_ID = RESURRECT]
[12/12/2011 01:52:52 PM] Open serial port...OK
[12/12/2011 01:52:52 PM] Connecting to the RIFF Box...OK
[12/12/2011 01:52:52 PM] Firmware Version: 1.28, JTAG Manager Version: 1.37
[12/12/2011 01:52:52 PM] Selected Resurrector: [SE E15i]
[12/12/2011 01:52:52 PM]
[12/12/2011 01:52:52 PM] Connecting to the dead body...OK
[12/12/2011 01:52:52 PM] Detected dead body ID: 0x203C00E1 - CORRECT!
[12/12/2011 01:52:52 PM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
[12/12/2011 01:52:52 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[12/12/2011 01:52:52 PM]
[12/12/2011 01:52:52 PM] Resurrection sequence started.
[12/12/2011 01:52:52 PM] Establish communication with the phone...OK
[12/12/2011 01:52:52 PM] Initializing internal hardware configuration...OK
[12/12/2011 01:52:52 PM] Uploading resurrector data into memory...OK
[12/12/2011 01:52:52 PM] Starting communication with resurrector...OK
[12/12/2011 01:52:52 PM]
[12/12/2011 01:52:52 PM] Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55BC (512MB)
[12/12/2011 01:52:52 PM] Selected Resurrection Data for the NAND Chip with Page size = 2KB
[12/12/2011 01:52:52 PM]
[12/12/2011 01:52:52 PM] Backup Important Zones...OK
[12/12/2011 01:52:52 PM] Preparing data. Please wait...OK
[12/12/2011 01:52:52 PM] Unlocking the Phone...OK
[12/12/2011 01:52:52 PM] Unlock complete!
[12/12/2011 01:52:52 PM] [FINISH OPERATION_ID = RESURRECT]
| After Unlock No Network Found Then I Repair TA Zone . Quote:
What to do in case that phone has no network ?
- Connect phone to RIFF Box
- Select model
- Click "Resurrection"
- Tick "Repair TA Zone"
- Enter valid IMEI
- Click "Resurrect"
| Log, Quote:
[12/12/2011 02:28:05 PM] [START OPERATION_ID = RESURRECT]
[12/12/2011 02:29:31 PM] Open serial port...OK
[12/12/2011 02:29:31 PM] Connecting to the RIFF Box...OK
[12/12/2011 02:29:31 PM] Firmware Version: 1.28, JTAG Manager Version: 1.37
[12/12/2011 02:29:31 PM] Selected Resurrector: [SE E15i]
[12/12/2011 02:29:31 PM]
[12/12/2011 02:29:31 PM] Connecting to the dead body...OK
[12/12/2011 02:29:31 PM] Detected dead body ID: 0x203C00E1 - CORRECT!
[12/12/2011 02:29:31 PM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
[12/12/2011 02:29:31 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[12/12/2011 02:29:31 PM]
[12/12/2011 02:29:31 PM] Resurrection sequence started.
[12/12/2011 02:29:31 PM] Establish communication with the phone...OK
[12/12/2011 02:29:31 PM] Initializing internal hardware configuration...OK
[12/12/2011 02:29:31 PM] Uploading resurrector data into memory...OK
[12/12/2011 02:29:31 PM] Starting communication with resurrector...OK
[12/12/2011 02:29:31 PM]
[12/12/2011 02:29:31 PM] Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55BC (512MB)
[12/12/2011 02:29:31 PM] Selected Resurrection Data for the NAND Chip with Page size = 2KB
[12/12/2011 02:29:31 PM]
[12/12/2011 02:29:31 PM] Preparing data. Please wait...OK
[12/12/2011 02:29:31 PM] Flashing the dead body...OK
[12/12/2011 02:29:31 PM] Resurrection complete!
[12/12/2011 02:29:31 PM] [FINISH OPERATION_ID = RESURRECT]
| |
| |