Error 49 with a i9100 - GSM-Forum

asmodi · 04-18-2013, 00:51

im trying to repair the boot of this i9100 but always the same error , i had try with usb cable or charger or holding power buton but not succes :

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9100 V1.0.4850.415]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x49): Communication is not established. Terminating.

**legija** · 04-18-2013, 10:01

Samsung i9100 should be connected using fixed TCK settings, and NOT with RTCK settings.

asmodi · 04-18-2013, 13:15

u mean 8Mhz ? , i had try with 8Mhz and it das not work

**aZimBahar** · 10-02-2014, 06:23

I have same error , 1st time hang on 30% After that error

Quote:

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x49): Communication is not established. Terminating.

I already solder many time & goodly But same . also press power write time
But There is same error

04-18-2013, 10:01	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Samsung i9100 should be connected using fixed TCK settings, and NOT with RTCK settings.

04-18-2013, 13:15	#3 (permalink)
asmodi No Life Poster Join Date: Sep 2005 Posts: 1,068 Member: 183976 Status: Offline Thanks Meter: 134	u mean 8Mhz ? , i had try with 8Mhz and it das not work