ERROR: No response from the RIFF Box.??? - GSM-Forum

hugmax · 11-05-2013, 11:23

I never had this error, ideas?
I havent search the forum yet, so I apologize for that.

br

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung I9000 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.

hugmax · 11-05-2013, 11:31

I searched and found the answer on FAQ.

tried with another version that I had on my hdd

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.47
Selected Resurrector: [Samsung I9000 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
Resurrection complete!

**legija** · 11-05-2013, 12:21

This CPU doesn't have a RTCK signal, hence the problems in first log.

hugmax · 11-06-2013, 09:26

Quote:

Originally Posted by legija

This CPU doesn't have a RTCK signal, hence the problems in first log.

Yes, there must be an issue with the updated i9000.DLL
The first log is from the latest version soft/DLL

I have another i9000 here, I will test it again with latest release and will be changing tick to 8mghz

Enviado desde mi A100 usando Tapatalk 2

**legija** · 11-06-2013, 11:12

There is no issues with DLL, but with Your settings. You used RTCK in first log, while You had to use fixed TCK.

11-05-2013, 11:31	#2 (permalink)
hugmax No Life Poster Join Date: May 2009 Location: spain Posts: 2,991 Member: 1038811 Status: Offline Sonork: 100.1585462 Thanks Meter: 974	I searched and found the answer on FAQ. tried with another version that I had on my hdd Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.47 Selected Resurrector: [Samsung I9000 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK Resurrection complete!

11-05-2013, 12:21	#3 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	This CPU doesn't have a RTCK signal, hence the problems in first log.

11-06-2013, 11:12	#5 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	There is no issues with DLL, but with Your settings. You used RTCK in first log, while You had to use fixed TCK.