shw-m200k dead boot riffbox team pls hlp... - GSM-Forum

ian_ramos · 02-13-2013, 12:20

how to repair dead boot samsung shw-m200k...

Faheem Anjum · 02-13-2013, 13:59

download dll from Support , Check manual inside the dll

BABAK NURI · 02-14-2013, 01:03

Quote:

Originally Posted by ian_ramos

how to repair dead boot samsung shw-m200k...

Hi
SHW-M200k Officially Not Supported...But With M200s.dll You Can Repair and Start "Downloading" But Maybe You Have Problem During Flash Firmware..

So,Plz Don't Touch Phone and Contact Me Via Sonork...We can add this model in Support List

ian_ramos · 02-22-2013, 04:27

riffbox team pls add, SHW-M200K repair dead boot...

lasertec_06 · 02-26-2013, 14:05

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung M200S V1.0.4787.59328]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Detected an Initialized FLASH2 Chip, ID: 0x0002/0x0100 (SEM16G, 0x0003B5400000 Bytes = 14.83 GB)
Detected an Initialized FLASH3 Chip, ID: 0x0002/0x0100 (SEM16G, 0x000000100000 Bytes = 1.00 MB)

Flashing the dead body...OK

still no download mood no ask for drivers

sanjoychy · 03-05-2013, 15:50

Quote:

Originally Posted by BABAK NURI

Hi
SHW-M200k Officially Not Supported...But With M200s.dll You Can Repair and Start "Downloading" But Maybe You Have Problem During Flash Firmware..

So,Plz Don't Touch Phone and Contact Me Via Sonork...We can add this model in Support List

hi i got a Shw m200k which is not full run.
Only Nexus Logo Showing.

Bootloader mode is Ok but when i am trying to
go to Recovery Mode. then it was fail.

And stuck at droid screen. No menu will come.

Any suggestions pls ??

02-13-2013, 12:20	#1 (permalink)
ian_ramos No Life Poster Join Date: Aug 2006 Location: Dhahran ph Posts: 568 Member: 334094 Status: Offline Sonork: none Thanks Meter: 73	shw-m200k dead boot riffbox team pls hlp... how to repair dead boot samsung shw-m200k...

02-13-2013, 13:59	#2 (permalink)
Faheem Anjum No Life Poster Join Date: Nov 2006 Location: (United States Of Islam) Age: 37 Posts: 24,984 Member: 399832 Status: Offline Sonork: Faheem Anjum Thanks Meter: 24,310	download dll from Support , Check manual inside the dll

02-22-2013, 04:27	#4 (permalink)
ian_ramos No Life Poster Join Date: Aug 2006 Location: Dhahran ph Posts: 568 Member: 334094 Status: Offline Sonork: none Thanks Meter: 73	riffbox team pls add, SHW-M200K repair dead boot...

02-26-2013, 14:05	#5 (permalink)
lasertec_06 No Life Poster Join Date: May 2009 Age: 49 Posts: 801 Member: 1027729 Status: Offline Thanks Meter: 97	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung M200S V1.0.4787.59328] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Detected an Initialized FLASH2 Chip, ID: 0x0002/0x0100 (SEM16G, 0x0003B5400000 Bytes = 14.83 GB) Detected an Initialized FLASH3 Chip, ID: 0x0002/0x0100 (SEM16G, 0x000000100000 Bytes = 1.00 MB) Flashing the dead body...OK still no download mood no ask for drivers