Galaxy ace (s5830) Successfully repair boot done :) - GSM-Forum

GmmalGSM · 10-12-2011, 21:49

Samsung S5830 Repair boot Done

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.36
Selected Resurrector: [Samsung S5830]

Connecting to the dead body...OK
Detected dead body ID: 0x303C10E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)

Flashing the dead body...OK
Resurrection complete!

thanx RIFF-BOX team

B.R

MR.SONY · 10-12-2011, 21:55

THANX for sharing your test

Keep Going brother

tamertotti · 10-13-2011, 13:44

thanks bro u great in all models

3GCELL · 09-05-2012, 23:27

RIFF BOX supports BCM 2155?

charbel · 02-15-2013, 18:21

please can you help me ?
i have a problem in the riff box.
i solder the jtag cable on s5830i and i do all the step,
when i press on the resurrection give me the way for do it.
and give on the software

charbel · 02-15-2013, 18:22

Open serial port...OK
Connecting to the RIFF Box...ERROR

ERROR: At least 1.34 Box's Firmware Version is required.
Current version is 1.33. Please update BOX Firmware.

silicon brj · 05-07-2014, 10:55

help for repair dead boot samsung s5830, i would like to brief about set history firs the problem is only hang on samsung logo i tried to flash but unable to boot in download mode then i try ressurection while processing stuck in 90% then hand set is dead now trying here is log

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung S5830 V1.0.4860.51697]

Connecting to the dead body...OK
Detected dead body ID: 0x503C10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is 400 kHz

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x44): Communication is not established. Terminating.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia "Contact Service" Repairer	Dirk	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	10-04-2011 05:45
Contact Service Repairer 1.2 by Bartek	Allen	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	02-23-2011 09:00
F_loaders.bin and Boot.bin .. .	micklong	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	01-29-2001 14:49
Phone not respond! (Load boot data) Need a help !	SashaM	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	01-23-2001 02:10
New!! Nokia Flash Checksum And Contact Service Repair	HookerGsM	Main Sales Section	0	01-02-2001 10:12

10-12-2011, 21:55	#2 (permalink)
MR.SONY Freak Poster Join Date: May 2009 Location: Egypt Posts: 125 Member: 1040384 Status: Offline Sonork: 100.1583996 Thanks Meter: 202	THANX for sharing your test Keep Going brother

10-13-2011, 13:44	#3 (permalink)
tamertotti Freak Poster Join Date: Mar 2009 Location: dubai, UAE Age: 40 Posts: 102 Member: 1000673 Status: Offline Sonork: 100.1597409 Thanks Meter: 115	thanks bro u great in all models

09-05-2012, 23:27	#4 (permalink)
3GCELL Junior Member Join Date: Jan 2008 Posts: 28 Member: 668891 Status: Offline Thanks Meter: 0	RIFF BOX supports BCM 2155?

02-15-2013, 18:21	#5 (permalink)
charbel Freak Poster Join Date: Dec 2004 Age: 55 Posts: 191 Member: 100241 Status: Offline Thanks Meter: 20	please can you help me ? i have a problem in the riff box. i solder the jtag cable on s5830i and i do all the step, when i press on the resurrection give me the way for do it. and give on the software

02-15-2013, 18:22	#6 (permalink)
charbel Freak Poster Join Date: Dec 2004 Age: 55 Posts: 191 Member: 100241 Status: Offline Thanks Meter: 20	Open serial port...OK Connecting to the RIFF Box...ERROR ERROR: At least 1.34 Box's Firmware Version is required. Current version is 1.33. Please update BOX Firmware.

05-07-2014, 10:55	#7 (permalink)
silicon brj No Life Poster Join Date: Nov 2007 Location: Nepal Posts: 528 Member: 622060 Status: Offline Thanks Meter: 37	help for repair dead boot samsung s5830, i would like to brief about set history firs the problem is only hang on samsung logo i tried to flash but unable to boot in download mode then i try ressurection while processing stuck in 90% then hand set is dead now trying here is log Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.55 Selected Resurrector: [Samsung S5830 V1.0.4860.51697] Connecting to the dead body...OK Detected dead body ID: 0x503C10E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is 400 kHz Resurrection sequence started. Establish communication with the phone...FAILED ERROR(0x44): Communication is not established. Terminating.