GT-B5510 dead Boot after wrong PIT file - GSM-Forum

XHouser · 06-14-2012, 09:29

Mr Legija please add Samsung B5510! Need resurrection for this model. Hope add soon! Thx for Good support.

XHouser · 06-14-2012, 09:32

This model not supported by any box! Need urgently! Hope do the best you can!

**legija** · 06-14-2012, 11:19

Hi,
Please contact me via Sonork or ICQ.

XHouser · 08-08-2012, 15:32

Hy mr legija, still needed boot file for B5510. Please uodate this file to riff.

samusprime · 09-13-2012, 17:03

mr legija i have a phone for test.... how i can contact with sonork? send pm please

XHouser · 10-26-2012, 15:09

Hy mr Legija, phone back in my hand
I try to resurrect but this error

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.45
Selected Resurrector: [Samsung B5510 V1.0.4662.12401]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3617F - CORRECT!
Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x05070000000000000000000020000000

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x44): Communication is not established. Terminating

Riff could not establish communication with phone. I try all medods ...eith usb cable with battery and power, etc etc.
Please HELP!

XHouser · 10-26-2012, 16:24

Finaly works but in that WAY : Press POWER VOL UP and VOL down and connect Battery (without USB cable).

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.45
Selected Resurrector: [Samsung B5510 V1.0.4662.12401]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3617F - CORRECT!
Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 4KB

Flashing the dead body...OK
Resurrection complete!

So this is the right procedure! I hope will be usseful for you. I spend 2 hours to find that!

06-14-2012, 09:29	#1 (permalink)
XHouser Freak Poster Join Date: Jun 2005 Location: Romania Age: 38 Posts: 375 Member: 151737 Status: Offline Sonork: 100.1595988 Thanks Meter: 91	GT-B5510 dead Boot after wrong PIT file Mr Legija please add Samsung B5510! Need resurrection for this model. Hope add soon! Thx for Good support.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bin files to 6150	BiG	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	12-20-1999 14:08
Change Bin-file in Nokia..possible??	BiG	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	11-20-1999 16:56
5110 ver 5.24 scr file	friendlypirate	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	11-06-1999 05:04
how can we use *.scr files to unlock	shadow77	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	10-27-1999 03:13

06-14-2012, 09:32	#2 (permalink)
XHouser Freak Poster Join Date: Jun 2005 Location: Romania Age: 38 Posts: 375 Member: 151737 Status: Offline Sonork: 100.1595988 Thanks Meter: 91	This model not supported by any box! Need urgently! Hope do the best you can!

06-14-2012, 11:19	#3 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, Please contact me via Sonork or ICQ.

08-08-2012, 15:32	#4 (permalink)
XHouser Freak Poster Join Date: Jun 2005 Location: Romania Age: 38 Posts: 375 Member: 151737 Status: Offline Sonork: 100.1595988 Thanks Meter: 91	Hy mr legija, still needed boot file for B5510. Please uodate this file to riff.

09-13-2012, 17:03	#5 (permalink)
samusprime No Life Poster Join Date: Oct 2005 Location: .:Planet Namek:. Posts: 1,121 Member: 189984 Status: Offline Thanks Meter: 112	mr legija i have a phone for test.... how i can contact with sonork? send pm please

10-26-2012, 15:09	#6 (permalink)
XHouser Freak Poster Join Date: Jun 2005 Location: Romania Age: 38 Posts: 375 Member: 151737 Status: Offline Sonork: 100.1595988 Thanks Meter: 91	Hy mr Legija, phone back in my hand I try to resurrect but this error Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.45 Selected Resurrector: [Samsung B5510 V1.0.4662.12401] Connecting to the dead body...OK Detected dead body ID: 0x07B3617F - CORRECT! Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Settings Code: 0x05070000000000000000000020000000 Resurrection sequence started. Establish communication with the phone...FAILED ERROR(0x44): Communication is not established. Terminating Riff could not establish communication with phone. I try all medods ...eith usb cable with battery and power, etc etc. Please HELP!

10-26-2012, 16:24	#7 (permalink)
XHouser Freak Poster Join Date: Jun 2005 Location: Romania Age: 38 Posts: 375 Member: 151737 Status: Offline Sonork: 100.1595988 Thanks Meter: 91	Finaly works but in that WAY : Press POWER VOL UP and VOL down and connect Battery (without USB cable). Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.45 Selected Resurrector: [Samsung B5510 V1.0.4662.12401] Connecting to the dead body...OK Detected dead body ID: 0x07B3617F - CORRECT! Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Selected Resurrection Data for the NAND Chip with Page size = 4KB Flashing the dead body...OK Resurrection complete! So this is the right procedure! I hope will be usseful for you. I spend 2 hours to find that!