HD2 after unlock touchscreen not working - GSM-Forum

Tommi_GSM · 06-01-2012, 08:40

htc hd2 after unlock touchscreen not working
i'm tried unlock and other touchscreen i flashed mobile with original software but problem not solved please help for this problem..

Here is a log:
[2012-05-31 11:38:39] [START OPERATION_ID = RESURRECT]
[2012-05-31 11:38:41] Open serial port...OK
[2012-05-31 11:38:41] Connecting to the RIFF Box...OK
[2012-05-31 11:38:41] Firmware Version: 1.32, JTAG Manager Version: 1.43
[2012-05-31 11:38:41] Selected Resurrector: [HTC HD2 (Leo) V1.00]
[2012-05-31 11:38:41]
[2012-05-31 11:38:41] Connecting to the dead body...OK
[2012-05-31 11:38:41] Detected dead body ID: 0x202400E1 - CORRECT!
[2012-05-31 11:38:41] Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
[2012-05-31 11:38:41] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[2012-05-31 11:38:41]
[2012-05-31 11:38:41] Resurrection sequence started.
[2012-05-31 11:38:41] Establish communication with the phone...OK
[2012-05-31 11:38:41] Initializing internal hardware configuration...OK
[2012-05-31 11:38:41] Uploading resurrector data into memory...FAILED
[2012-05-31 11:38:41] ERROR: RAM memory selftest failed.
[2012-05-31 11:38:41] [FINISH OPERATION_ID = RESURRECT]

[2012-05-31 11:39:26] [START OPERATION_ID = RESURRECT]
[2012-05-31 11:39:35] Open serial port...OK
[2012-05-31 11:39:35] Connecting to the RIFF Box...OK
[2012-05-31 11:39:35] Firmware Version: 1.32, JTAG Manager Version: 1.43
[2012-05-31 11:39:35] Selected Resurrector: [HTC HD2 (Leo) V1.00]
[2012-05-31 11:39:35]
[2012-05-31 11:39:35] Connecting to the dead body...OK
[2012-05-31 11:39:35] Detected dead body ID: 0x202400E1 - CORRECT!
[2012-05-31 11:39:35] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
[2012-05-31 11:39:35] Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
[2012-05-31 11:39:35]
[2012-05-31 11:39:35] Resurrection sequence started.
[2012-05-31 11:39:35] Establish communication with the phone...OK
[2012-05-31 11:39:35] Initializing internal hardware configuration...OK
[2012-05-31 11:39:35] Uploading resurrector data into memory...OK
[2012-05-31 11:39:35] Starting communication with resurrector...OK
[2012-05-31 11:39:35]
[2012-05-31 11:39:35] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB)
[2012-05-31 11:39:35] Unlocking the Phone...OK
[2012-05-31 11:39:35] Unlock complete!
[2012-05-31 11:39:35] [FINISH OPERATION_ID = RESURRECT]

Tommi_GSM · 06-03-2012, 10:32

somebody wants to help me?

medie · 06-23-2012, 18:36

Quote:

Originally Posted by Tommi_GSM

htc hd2 after unlock touchscreen not working
i'm tried unlock and other touchscreen i flashed mobile with original software but problem not solved please help for this problem..

Here is a log:
[2012-05-31 11:38:39] [START OPERATION_ID = RESURRECT]
[2012-05-31 11:38:41] Open serial port...OK
[2012-05-31 11:38:41] Connecting to the RIFF Box...OK
[2012-05-31 11:38:41] Firmware Version: 1.32, JTAG Manager Version: 1.43
[2012-05-31 11:38:41] Selected Resurrector: [HTC HD2 (Leo) V1.00]
[2012-05-31 11:38:41]
[2012-05-31 11:38:41] Connecting to the dead body...OK
[2012-05-31 11:38:41] Detected dead body ID: 0x202400E1 - CORRECT!
[2012-05-31 11:38:41] Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
[2012-05-31 11:38:41] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[2012-05-31 11:38:41]
[2012-05-31 11:38:41] Resurrection sequence started.
[2012-05-31 11:38:41] Establish communication with the phone...OK
[2012-05-31 11:38:41] Initializing internal hardware configuration...OK
[2012-05-31 11:38:41] Uploading resurrector data into memory...FAILED
[2012-05-31 11:38:41] ERROR: RAM memory selftest failed.
[2012-05-31 11:38:41] [FINISH OPERATION_ID = RESURRECT]

[2012-05-31 11:39:26] [START OPERATION_ID = RESURRECT]
[2012-05-31 11:39:35] Open serial port...OK
[2012-05-31 11:39:35] Connecting to the RIFF Box...OK
[2012-05-31 11:39:35] Firmware Version: 1.32, JTAG Manager Version: 1.43
[2012-05-31 11:39:35] Selected Resurrector: [HTC HD2 (Leo) V1.00]
[2012-05-31 11:39:35]
[2012-05-31 11:39:35] Connecting to the dead body...OK
[2012-05-31 11:39:35] Detected dead body ID: 0x202400E1 - CORRECT!
[2012-05-31 11:39:35] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
[2012-05-31 11:39:35] Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
[2012-05-31 11:39:35]
[2012-05-31 11:39:35] Resurrection sequence started.
[2012-05-31 11:39:35] Establish communication with the phone...OK
[2012-05-31 11:39:35] Initializing internal hardware configuration...OK
[2012-05-31 11:39:35] Uploading resurrector data into memory...OK
[2012-05-31 11:39:35] Starting communication with resurrector...OK
[2012-05-31 11:39:35]
[2012-05-31 11:39:35] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB)
[2012-05-31 11:39:35] Unlocking the Phone...OK
[2012-05-31 11:39:35] Unlock complete!
[2012-05-31 11:39:35] [FINISH OPERATION_ID = RESURRECT]

This is flashing or unlocking (i mean this log)

ferhel · 06-23-2012, 18:51

@medie

it's unlocking log's sir

Quote:

[2012-05-31 11:39:35] Unlocking the Phone...OK
[2012-05-31 11:39:35] Unlock complete!

@Tommi_GSM

try to flash RUU post result

saleem5001 · 06-24-2012, 09:23

dear check u r assembleing may be assembling error some thing miss recheck it

06-01-2012, 08:40	#1 (permalink)
Tommi_GSM Insane Poster Join Date: Nov 2006 Posts: 66 Member: 393902 Status: Offline Thanks Meter: 4	HD2 after unlock touchscreen not working htc hd2 after unlock touchscreen not working i'm tried unlock and other touchscreen i flashed mobile with original software but problem not solved please help for this problem.. Here is a log: [2012-05-31 11:38:39] [START OPERATION_ID = RESURRECT] [2012-05-31 11:38:41] Open serial port...OK [2012-05-31 11:38:41] Connecting to the RIFF Box...OK [2012-05-31 11:38:41] Firmware Version: 1.32, JTAG Manager Version: 1.43 [2012-05-31 11:38:41] Selected Resurrector: [HTC HD2 (Leo) V1.00] [2012-05-31 11:38:41] [2012-05-31 11:38:41] Connecting to the dead body...OK [2012-05-31 11:38:41] Detected dead body ID: 0x202400E1 - CORRECT! [2012-05-31 11:38:41] Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK [2012-05-31 11:38:41] Adaptive Clocking RTCK Sampling is: [Sample at MAX] [2012-05-31 11:38:41] [2012-05-31 11:38:41] Resurrection sequence started. [2012-05-31 11:38:41] Establish communication with the phone...OK [2012-05-31 11:38:41] Initializing internal hardware configuration...OK [2012-05-31 11:38:41] Uploading resurrector data into memory...FAILED [2012-05-31 11:38:41] ERROR: RAM memory selftest failed. [2012-05-31 11:38:41] [FINISH OPERATION_ID = RESURRECT] [2012-05-31 11:39:26] [START OPERATION_ID = RESURRECT] [2012-05-31 11:39:35] Open serial port...OK [2012-05-31 11:39:35] Connecting to the RIFF Box...OK [2012-05-31 11:39:35] Firmware Version: 1.32, JTAG Manager Version: 1.43 [2012-05-31 11:39:35] Selected Resurrector: [HTC HD2 (Leo) V1.00] [2012-05-31 11:39:35] [2012-05-31 11:39:35] Connecting to the dead body...OK [2012-05-31 11:39:35] Detected dead body ID: 0x202400E1 - CORRECT! [2012-05-31 11:39:35] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK [2012-05-31 11:39:35] Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] [2012-05-31 11:39:35] [2012-05-31 11:39:35] Resurrection sequence started. [2012-05-31 11:39:35] Establish communication with the phone...OK [2012-05-31 11:39:35] Initializing internal hardware configuration...OK [2012-05-31 11:39:35] Uploading resurrector data into memory...OK [2012-05-31 11:39:35] Starting communication with resurrector...OK [2012-05-31 11:39:35] [2012-05-31 11:39:35] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB) [2012-05-31 11:39:35] Unlocking the Phone...OK [2012-05-31 11:39:35] Unlock complete! [2012-05-31 11:39:35] [FINISH OPERATION_ID = RESURRECT]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
"Deskey Device driver not found" ?? Please help	DivAdonis	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-08-2017 13:21
6110 power does not stay on	sc~micro	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-30-2014 08:14
how the **** do i make wintesla 6.03 work	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	06-16-1999 08:41

06-03-2012, 10:32	#2 (permalink)
Tommi_GSM Insane Poster Join Date: Nov 2006 Posts: 66 Member: 393902 Status: Offline Thanks Meter: 4	somebody wants to help me?

06-24-2012, 09:23	#5 (permalink)
saleem5001 No Life Poster Join Date: Jan 2010 Location: South africa Age: 35 Posts: 2,672 Member: 1197620 Status: Offline Sonork: 100.1602278 Thanks Meter: 647	dear check u r assembleing may be assembling error some thing miss recheck it