hd7 plz help me - GSM-Forum

robean · 03-21-2012, 02:36

htc hd7 resurrect successfully but while flashing the shipped rom it stuck at 7% and after that it gets dead so that i have to resurrect again i write 11111111 also in cid n repair imei too n write the full dump ( HD7_Full512Mb_00EC_66BC_Alive ) file too but it stuck in 7 while flashing plz help me to make it alive

BABAK NURI · 03-21-2012, 09:25

7% 9% 11% Is a radio write..if always error at this,,,only hw fault....believe me ,i repair many of hd7 and hd2

**legija** · 03-21-2012, 10:02

If phone PCB (CPU) gets hot, it's QSD8250 failure, hence it's HW problem.
Replacing CPU with good one will help.

robean · 03-21-2012, 12:16

Quote:

Originally Posted by BABAK NURI

7% 9% 11% Is a radio write..if always error at this,,,only hw fault....believe me ,i repair many of hd7 and hd2

can yuh give me proper and exact solution for hardware fault

LoveLess · 03-22-2012, 20:27

Quote:

Originally Posted by robean

can yuh give me proper and exact solution for hardware fault

yes exactly they (mr babak nuri and sir legija ) are right.. i faced same pb..

solution is boot repair then put the device in DEEP FREZZER and keep it approx 30 minutes or 1 hour then update firmware with RUU..

this is the just temporary solution...

03-21-2012, 02:36	#1 (permalink)
robean No Life Poster Join Date: Jul 2007 Location: Vancouver BC & Kathmandu Nepal Posts: 1,201 Member: 538410 Status: Offline Sonork: 100.1590750 Thanks Meter: 193	hd7 plz help me htc hd7 resurrect successfully but while flashing the shipped rom it stuck at 7% and after that it gets dead so that i have to resurrect again i write 11111111 also in cid n repair imei too n write the full dump ( HD7_Full512Mb_00EC_66BC_Alive ) file too but it stuck in 7 while flashing plz help me to make it alive

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
my 8810 is phone locked ,can somebody please help	duyphuc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	18	12-23-2014 09:03
Eeprom dump lost, help needed.	CAMILO	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:04
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
Winlock 1.10 - Help	rdmfs	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	06-25-1999 08:21

03-21-2012, 09:25	#2 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	7% 9% 11% Is a radio write..if always error at this,,,only hw fault....believe me ,i repair many of hd7 and hd2

03-21-2012, 10:02	#3 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	If phone PCB (CPU) gets hot, it's QSD8250 failure, hence it's HW problem. Replacing CPU with good one will help.