help in huwai 2901

[khushiraj]

i read backup and write but show this error

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.20
Selected Resurrector: [Huawei C2901M]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - IGNORED!
Set I/O Voltage reads as 2.61V, TCK Frequency is 4 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x017E/0x2210 (8MB)

Writting FLASH1 memory from 0x00000000 to 0x007FFFFF
WARNING: Programming Error (0x25) at 0x00010000. Attempting to Repeat.
WARNING: Programming Error (0x25) at 0x00010000. Attempting to Repeat.
WARNING: Programming Error (0x25) at 0x00010000 is Ignored.
WARNING: Programming Error (0x25) at 0x00020000 is Ignored.
WARNING: Programming Error (0x25) at 0x00030000 is Ignored.
WARNING: Programming Error (0x25) at 0x00040000 is Ignored.
WARNING: Programming Error (0x25) at 0x00050000 is Ignored.
WARNING: Programming Error (0x25) at 0x00060000 is Ignored.
WARNING: Programming Error (0x25) at 0x00070000 is Ignored.
WARNING: Programming Error (0x25) at 0x00080000 is Ignored.
WARNING: Programming Error (0x25) at 0x00090000 is Ignored.
WARNING: Programming Error (0x25) at 0x000A0000 is Ignored.
WARNING: Programming Error (0x25) at 0x000B0000 is Ignored.
WARNING: Programming Error (0x25) at 0x000C0000 is Ignored.
WARNING: Programming Error (0x25) at 0x000D0000 is Ignored.
WARNING: Programming Error (0x25) at 0x000E0000 is Ignored.
WARNING: Programming Error (0x25) at 0x00130000 is Ignored.
WARNING: Programming Error (0x25) at 0x00150000 is Ignored.
WARNING: Programming Error (0x25) at 0x00160000 is Ignored.
WARNING: Programming Error (0x25) at 0x00170000 is Ignored.
WARNING: Programming Error (0x25) at 0x00180000 is Ignored.
WARNING: Programming Error (0x25) at 0x001B0000 is Ignored.
WARNING: Programming Error (0x25) at 0x001F0000 is Ignored.
WARNING: Programming Error (0x25) at 0x00200000 is Ignored.
WARNING: Programming Error (0x25) at 0x00250000 is Ignored.
WARNING: Programming Error (0x25) at 0x00520000 is Ignored.
WARNING: Programming Error (0x25) at 0x005A0000 is Ignored.
WARNING: Programming Error (0x25) at 0x005C0000 is Ignored.
WARNING: Programming Error (0x25) at 0x00610000 is Ignored.
WARNING: Programming Error (0x25) at 0x00620000 is Ignored.
WARNING: Programming Error (0x25) at 0x00630000 is Ignored.
WARNING: Programming Error (0x25) at 0x00640000 is Ignored.
WARNING: Programming Error (0x25) at 0x00650000 is Ignored.
WARNING: Programming Error (0x25) at 0x00660000 is Ignored.
WARNING: Programming Error (0x25) at 0x00670000 is Ignored.
WARNING: Programming Error (0x25) at 0x00680000 is Ignored.
WARNING: Programming Error (0x25) at 0x00690000 is Ignored.
WARNING: Programming Error (0x25) at 0x006A0000 is Ignored.
WARNING: Programming Error (0x25) at 0x006E0000 is Ignored.
WARNING: Programming Error (0x25) at 0x006F0000 is Ignored.
WARNING: Programming Error (0x25) at 0x00700000 is Ignored.
WARNING: Programming Error (0x25) at 0x00710000 is Ignored.
WARNING: Programming Error (0x25) at 0x00720000 is Ignored.
WARNING: Programming Error (0x25) at 0x00730000 is Ignored.
WARNING: Programming Error (0x25) at 0x00740000 is Ignored.
WARNING: Programming Error (0x25) at 0x00750000 is Ignored.
WARNING: Programming Error (0x25) at 0x00760000 is Ignored.
WARNING: Programming Error (0x25) at 0x00770000 is Ignored.
WARNING: Programming Error (0x25) at 0x00780000 is Ignored.
WARNING: Programming Error (0x25) at 0x00790000 is Ignored.
WARNING: Programming Error (0x25) at 0x007A0000 is Ignored.
WARNING: Programming Error (0x25) at 0x007B0000 is Ignored.
WARNING: Programming Error (0x25) at 0x007C0000 is Ignored.
WARNING: Programming Error (0x25) at 0x007D0000 is Ignored.
WARNING: Programming Error (0x25) at 0x007E0000 is Ignored.
Completed in 00:03:40.563 (Average Transfer Rate: 37.14 kB/s)

what is this and how to solv ????

[khushiraj]

i try to resurrection
model huwai 2901
show this erros

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.20
Selected Resurrector: [Huawei C2901M]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - WRONG!!!
ERROR: Current ID does not belong to the Huawei C2901M family.

i do chek /unchek by pass id but same

[ranagaurav]

why r u time and money west
this box is not support any discussion

[legija]

Originally Posted by khushiraj

i read backup and write but show this error

what is this and how to solv ????

Hi,
This looks like some problem with flash chip. Loader can not wrote data - it could be due to some hw problem, or possibly too high RTCK sampling for this chipset.

Can You tell us exact state of phone and its history ?