Help Lumia 620

[Gsmbizz]

Lumia 620 Dead During Flash

i was repair boot lumia 620 it repair done on riff box but
when i connect for flashing its vibrte
and making a port but atf or infinty not detect
its making qualcomm Hs-usb Qdloader 9008 usb port




[11/15/2013 4:54:29 PM] [START OPERATION_ID = RESURRECT]
[11/15/2013 4:55:50 PM] Open serial port...OK
[11/15/2013 4:55:50 PM] Connecting to the RIFF Box...OK
[11/15/2013 4:55:50 PM] Firmware Version: 1.37, JTAG Manager Version: 1.54
[11/15/2013 4:55:50 PM] Selected Resurrector: [Nokia Lumia 620 V1.0.5040.60717]
[11/15/2013 4:55:50 PM]
[11/15/2013 4:55:50 PM] Connecting to the dead body...OK
[11/15/2013 4:55:50 PM] Detected dead body ID: 0x207D00E1 - CORRECT!
[11/15/2013 4:55:50 PM] Set I/O Voltage reads as 1.81V, TCK Frequency is 4 MHz
[11/15/2013 4:55:50 PM]
[11/15/2013 4:55:50 PM] Resurrection sequence started.
[11/15/2013 4:55:50 PM] Establish communication with the phone...OK
[11/15/2013 4:55:50 PM] Initializing internal hardware configuration...OK
[11/15/2013 4:55:50 PM] Uploading resurrector data into memory...OK
[11/15/2013 4:55:50 PM] Starting communication with resurrector...OK
[11/15/2013 4:55:50 PM]
[11/15/2013 4:55:50 PM] Detected an Initialized FLASH1 Chip, ID: 0x0011/0x0100 (008G92, 0x0001D2000000 Bytes = 7.28 GB)
[11/15/2013 4:55:50 PM] Detected an Initialized FLASH2 Chip, ID: 0x0011/0x0100 (008G92, 0x000000400000 Bytes = 4.00 MB)
[11/15/2013 4:55:50 PM]
[11/15/2013 4:55:50 PM] No Resurrection Data is available for the eMMC Chip with Capacity = 7.28GB
[11/15/2013 4:55:50 PM] WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 7,23GB
[11/15/2013 4:55:50 PM]
[11/15/2013 4:55:50 PM] Flashing the dead body...OK
[11/15/2013 4:55:50 PM] Resurrection complete!