<<<hi mr legia can you help me with this kh6400>> - GSM-Forum

rock23 · 11-18-2010, 06:10

this model was dead by OCTOPUS IN FLASHING...........

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Custom Target: [ARM926, 3.00V, TAP0]

Connecting to the target...OK
Set I/O Voltage reads as 3.00V, TCK Frequency is 1 MHz

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x200C00E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.15, JTAG Manager Version: 1.19
Selected Custom Target: [ARM926, 3.00V, TAP0]

Connecting to the ARM926 target...OK
Set I/O Voltage reads as 2.99V, TCK Frequency is 1 MHz

Target ID on TAP0: 0x200C00E1 - Connected OK

JUST WANT TO REVIEVED BY RIFF

**legija** · 11-18-2010, 11:49

Hi,
I dont have firmware for this model, if You can ask Octopus supporters for boot files in bin format, then we can fix it.

rock23 · 11-18-2010, 12:42

http://rapidshare.com/files/431546767/KW640806.rar

hi you may check this please...

Dung Yaiba · 07-06-2011, 18:11

Quote:

Originally Posted by rock23

http://rapidshare.com/files/431546767/KW640806.rar

hi you may check this please...

link error !@ Please upload again !

Thanks

11-18-2010, 06:10	#1 (permalink)
rock23 Cheater -Don't Deal with him- Join Date: Jan 2008 Location: around the globe... Posts: 1,207 Member: 677681 Status: Offline Sonork: 100.1590886 Thanks Meter: 232	<<<hi mr legia can you help me with this kh6400>> this model was dead by OCTOPUS IN FLASHING........... Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.19 Selected Custom Target: [ARM926, 3.00V, TAP0] Connecting to the target...OK Set I/O Voltage reads as 3.00V, TCK Frequency is 1 MHz Following devices are found on the JTAG chain: Device on TAP #0: ID = 0x200C00E1, IR Length = 0x04 bits Total IR length: 0x0004 bits Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.15, JTAG Manager Version: 1.19 Selected Custom Target: [ARM926, 3.00V, TAP0] Connecting to the ARM926 target...OK Set I/O Voltage reads as 2.99V, TCK Frequency is 1 MHz Target ID on TAP0: 0x200C00E1 - Connected OK JUST WANT TO REVIEVED BY RIFF

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-27-2015 11:57
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-09-1999 17:04

11-18-2010, 11:49	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, I dont have firmware for this model, if You can ask Octopus supporters for boot files in bin format, then we can fix it.

11-18-2010, 12:42	#3 (permalink)
rock23 Cheater -Don't Deal with him- Join Date: Jan 2008 Location: around the globe... Posts: 1,207 Member: 677681 Status: Offline Sonork: 100.1590886 Thanks Meter: 232	http://rapidshare.com/files/431546767/KW640806.rar hi you may check this please...