How exactly connect a Huawei C5100 - GSM-Forum

s1emens · 05-27-2011, 08:17

I soldered all TRST, TDI, TMS, TCK, RTCK, TDO and NRST, VCC to Vbatt and GND to GND, but when trying to resurrect:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [Huawei C5100]

Connecting to the dead body...ERROR
ERROR: The RTCK Signal does not respond.

is it something wrong or i'm wrong in soldering? Please help, this is my first time with JTAG thanks

phone is alive but showing fs...... when powering

br,
s1emens

**legija** · 05-27-2011, 11:00

Most probably You havent connected it properly.
So check pinout carefully again, and of course check if PCB is powered by USB cable.

lalitgvarshney · 05-27-2011, 11:01

Hello
How u give Power To Huawei C5100......

By Usb Or By Charger ?

br
lalitg

s1emens · 05-27-2011, 17:39

all pins connected perfectly, i'll give photos tomorrow, power to pcb is using usb cable from usb port in pc, when usb cable plugged phone is automatically power on and start to blink restart, so pcb is definitely powered.

vcc connect to vbat? thanks

br,
s1emens

ditoblekok · 05-27-2011, 18:45

I do agree with s1emens..

I had 4 dead devices and 1 working phone in hand.. and tried to connected with riff and all wires connected properly with PCB..

Both i tried with USB and charger.. but RIFF can not detected it

Thanks..

amit kanpur · 05-27-2011, 20:24

contact me yahoo...........

s1emens · 05-28-2011, 04:18

can you give me your yahoo messenger id?

brm
s1emens

teknisi bloon · 06-18-2011, 10:23

i have 2 huawei C5100 and both couldn't connect too

05-27-2011, 08:17	#1 (permalink)
s1emens No Life Poster Join Date: Oct 2003 Age: 43 Posts: 1,335 Member: 40602 Status: Offline Thanks Meter: 118	How exactly connect a Huawei C5100 I soldered all TRST, TDI, TMS, TCK, RTCK, TDO and NRST, VCC to Vbatt and GND to GND, but when trying to resurrect: Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.24, JTAG Manager Version: 1.32 Selected Resurrector: [Huawei C5100] Connecting to the dead body...ERROR ERROR: The RTCK Signal does not respond. is it something wrong or i'm wrong in soldering? Please help, this is my first time with JTAG thanks phone is alive but showing fs...... when powering br, s1emens

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-27-2015 11:57
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
what prog changes imei on 6110 and how do i do it?	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-31-2012 20:09
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29
how the **** do i make wintesla 6.03 work	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	06-16-1999 08:41

05-27-2011, 11:00	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Most probably You havent connected it properly. So check pinout carefully again, and of course check if PCB is powered by USB cable.

05-27-2011, 11:01	#3 (permalink)
lalitgvarshney Freak Poster Join Date: Jan 2007 Location: DELHI,INDIA Posts: 376 Member: 427627 Status: Offline Thanks Meter: 160	Hello How u give Power To Huawei C5100...... By Usb Or By Charger ? br lalitg

05-27-2011, 17:39	#4 (permalink)
s1emens No Life Poster Join Date: Oct 2003 Age: 43 Posts: 1,335 Member: 40602 Status: Offline Thanks Meter: 118	all pins connected perfectly, i'll give photos tomorrow, power to pcb is using usb cable from usb port in pc, when usb cable plugged phone is automatically power on and start to blink restart, so pcb is definitely powered. vcc connect to vbat? thanks br, s1emens

05-27-2011, 18:45	#5 (permalink)
ditoblekok Junior Member Join Date: Feb 2008 Posts: 26 Member: 707869 Status: Offline Thanks Meter: 3	I do agree with s1emens.. I had 4 dead devices and 1 working phone in hand.. and tried to connected with riff and all wires connected properly with PCB.. Both i tried with USB and charger.. but RIFF can not detected it Thanks..

05-27-2011, 20:24	#6 (permalink)
amit kanpur No Life Poster Join Date: May 2009 Location: kanpur Age: 35 Posts: 2,443 Member: 1033905 Status: Offline Sonork: amitsharma Thanks Meter: 892	contact me yahoo...........

05-28-2011, 04:18	#7 (permalink)
s1emens No Life Poster Join Date: Oct 2003 Age: 43 Posts: 1,335 Member: 40602 Status: Offline Thanks Meter: 118	can you give me your yahoo messenger id? brm s1emens

06-18-2011, 10:23	#8 (permalink)
teknisi bloon Registered User Join Date: Nov 2007 Location: ID Posts: 180 Member: 624177 Status: Offline Thanks Meter: 23	i have 2 huawei C5100 and both couldn't connect too