How Repair Boot Huawei U8950-51?

[xKxOxDx]

Hi, I have a Huawei U8950-51 that stays stuck in logo,
i have an operational apparatus to work it and repair another,

can you tell me how to do to fix it?

Thanks in advance Babak Nuri and Legija

[BABAK NURI]

Hi
First,Please tell me about Model Name....
Then,if your phone is On but Stuck at Logo,Maybe need reflash FW or Maybe need replace eMMC...

[xKxOxDx]

Huawei G600 U8950-51
The phone was repaired with riff box and did so with the Huawei U8950-1.dll and now holds no flash. I brought in that state, also I have a phone that works well Huawei U8950-51 that can be used to repair the one stuck .

[BABAK NURI]

Hi
if you have another alive phone,You can read 512mb from rom1,Then save it and try for write to dead phone with "DCC Read/Write" Page

[xKxOxDx]

Proceeded to read the phone U8950-51 this e good condition and gave me error.
will debit had already three hours and was by 46%
What is happening?

Thanks in advance Babak Nuri and Legija

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Huawei U8950-1 V1.0.5052.61490]

Connecting to the dead body...OK
Detected dead body ID: 0x007730E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x050100000000000000000000E9000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (JJS00M, 0x0000E9000000 Bytes = 3.64 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (JJS00M, 0x000000100000 Bytes = 1.00 MB)

Looking for the RIFF BOX DCCLoader USB Interface Port...FAILED
The DCCLoader USB Interface is not found. Communication continues over the DCC Interface

Reading FLASH1 address space from 0x000000000000 to 0x0000E8FFFFFF
Failed to receive answer to READ command.

[xKxOxDx]

I have read 512MB, but will not let me write to the dead phone, it gives me error