Htc desire resurrection after dead

[tayeb_am]

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [HTC Desire V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.98V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x05010000000000000000000020000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB)

Erasing FLASH1 memory from 0x000000000000 to 0x00001FFFFFFF...OK
WARNING: Erasing Error (0x24) at 0x000000480000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x000005800000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x000005CA0000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x00000C000000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x00000C4C0000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x00000ED80000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x00000F040000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x00000F2A0000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x00000F580000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x000011A00000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x0000123C0000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x000013B40000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x0000151C0000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x0000158C0000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x000016500000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x000017E40000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x00001B6C0000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x00001DFC0000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x00001EA40000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x00001F900000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x00001F980000 is Ignored. Erase continues.
Completed in 00:00:28.626 (Average Transfer Rate: 18315.10 kB/s



Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [HTC Desire V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.98V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Flashing the dead body...FAILED
WARNING: Programming Error (0x24) at 0x000000480000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x000000490000 is handled as Cut Excess.
ERROR: Resurrection is not Completed due to Error: 0x3901

[legija]

RIFF JTAG Box FAQ - Error code 0x39 (0x3901)

[tayeb_am]

done bro thank you



.