htc desire sv repair problem - GSM-Forum

sunil1670 · 03-18-2014, 17:23

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [HTC Desire SV (PM8610000) V1.0.4892.63318]

Connecting to the dead body...OK
Detected dead body ID: 0x007700E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0065/0x006F (NROM M, 0x000008000000 Bytes = 128.00 MB)

No Resurrection Data is available for the eMMC Chip with Capacity = 131072KB
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 03,64GB

Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x46 (0x000000). Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x000005000200

sunil1670 · 03-19-2014, 06:36

any one can guide how to solve

M0YAL · 03-19-2014, 08:36

Hi,

This is usually eMMC problem, but it can be also bad connection of GND and NRST pins sometimes.

03-18-2014, 17:23	#1 (permalink)
sunil1670 No Life Poster Join Date: Dec 2012 Location: vadodara Posts: 1,320 Member: 1849215 Status: Offline Thanks Meter: 136	htc desire sv repair problem Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.55 Selected Resurrector: [HTC Desire SV (PM8610000) V1.0.4892.63318] Connecting to the dead body...OK Detected dead body ID: 0x007700E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0065/0x006F (NROM M, 0x000008000000 Bytes = 128.00 MB) No Resurrection Data is available for the eMMC Chip with Capacity = 131072KB WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 03,64GB Flashing the dead body... ERROR: DCC Loader has reported Error Code = 0x46 (0x000000). Trying to recover...FAILED ERROR: Failed due to multiple communication errors. Terminating at 0x000005000200

03-19-2014, 06:36	#2 (permalink)
sunil1670 No Life Poster Join Date: Dec 2012 Location: vadodara Posts: 1,320 Member: 1849215 Status: Offline Thanks Meter: 136	any one can guide how to solve

03-19-2014, 08:36	#3 (permalink)
M0YAL No Life Poster Join Date: May 2011 Location: india Posts: 1,679 Member: 1583254 Status: Offline Sonork: 100.1602320 Thanks Meter: 4,792	Hi, This is usually eMMC problem, but it can be also bad connection of GND and NRST pins sometimes.