HTC Diamond - resurrect fail - GSM-Forum

chip_2000 · 09-10-2010, 17:46

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [HTC Diamond]

Connecting to the dead body...OK
Detected dead body ID: 0xA01700E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x15AA (256MB)
Flashing the dead body...OK
Resurrection complete!

but im not see 3 color.

sen-i · 09-10-2010, 18:09

hardware fault i think

**legija** · 09-10-2010, 19:28

Phone will not start if eeprom is damaged - IMEI or security. In case of this, it is also required to reflash HTC partition and update IMEI.

Of course, it can be also hardware problem, too.

chip_2000 · 09-11-2010, 04:35

Quote:

Originally Posted by legija

Phone will not start if eeprom is damaged - IMEI or security. In case of this, it is also required to reflash HTC partition and update IMEI.

Of course, it can be also hardware problem, too.

imei update, how to reflash? phone not detected usb. maybe need full dump?

deepakgarg · 09-11-2010, 19:39

Quote:

Originally Posted by chip_2000

imei update, how to reflash? phone not detected usb. maybe need full dump?

now phone can enter bootloader mode????????????

chip_2000 · 09-14-2010, 08:33

Quote:

Originally Posted by deepakgarg

now phone can enter bootloader mode????????????

Not. bootloader not enter.

Odia The Ultimate · 09-14-2010, 10:22

Quote:

Originally Posted by chip_2000

imei update, how to reflash? phone not detected usb. maybe need full dump?

Resurrect again and this time answer other questions.

Odia.

09-10-2010, 17:46	#1 (permalink)
chip_2000 No Life Poster Join Date: Feb 2003 Location: UKRAINE Age: 46 Posts: 1,008 Member: 22400 Status: Offline Thanks Meter: 44	HTC Diamond - resurrect fail Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.13, JTAG Manager Version: 1.14 Selected Resurrector: [HTC Diamond] Connecting to the dead body...OK Detected dead body ID: 0xA01700E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x15AA (256MB) Flashing the dead body...OK Resurrection complete! but im not see 3 color.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3330 v 412 fail with dfs 211	denn	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	09-19-2001 22:06
In wintesla 3310, what does cobba parrarel failed means	brittnee	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	10	05-18-2001 16:05
MCU EEPROM contents: failed	phr3ak	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	02-12-2001 15:58
Nokia 5110 v. 5.24 Unlock Failed!	Cybertooth	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	02-28-2000 15:35
Mti init failed	dogbreak	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-22-1999 01:28

09-10-2010, 18:09	#2 (permalink)
sen-i Freak Poster Join Date: Nov 2008 Posts: 268 Member: 906499 Status: Offline Sonork: sen-i Thanks Meter: 47	hardware fault i think

09-10-2010, 19:28	#3 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Phone will not start if eeprom is damaged - IMEI or security. In case of this, it is also required to reflash HTC partition and update IMEI. Of course, it can be also hardware problem, too.