HTC Evo 3D CDMA Version repair - GSM-Forum

chavonbravo · 05-07-2012, 15:12

What is the process for an HTC device that doesn't have it's own dll?? I have an evo3d, cdma version, that I can successfully get into qhs_usb_dload mode via tp. The driver is enumerated as "Qualcomm HS-USB QDLoader 9008".

Every time I try to read from device with emmc plugin, I just get this response:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC Glacier via USB V1.0.4501.54909]

Looking for the HS-USB QDLoader Interface...OK
Open the HS-USB QDLoader Interface Port...OK

Establish connection with the Device...ERROR
ERROR: Qualcomm HS-USB Device does not respond.

Device never reboots or does anything. Any suggestions or help?
P.S. this is not a dead phone, it fully boots up and all. So emmc is not damaged at all.

chavonbravo · 05-07-2012, 15:18

Actually, that's what I get when I try second time. First time I boot up phone when I try, I get:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC Glacier via USB V1.0.4501.54909]

Looking for the HS-USB QDLoader Interface...OK
Open the HS-USB QDLoader Interface Port...OK

Establish connection with the Device...OK
Uploading resurrector data into memory...ERROR
ERROR: Wrong response from the Qualcomm HS-USB Device.

**legija** · 05-07-2012, 16:22

Hi,
You should contact me via Sonork.

bobbygrain · 05-10-2012, 03:08

I have A evo 3d cdma that needs fixed any one figure it out?

chavonbravo · 05-10-2012, 19:19

legija, I have gotten analyze jtag chain to output something twice, still trying to figure out jtag pads.

bobbygrain · 05-12-2012, 04:08

Hello I am new to riff box but I have an evo 3d cdma that I need to fix.Any thing I can do to help??

bobbygrain · 05-14-2012, 05:33

I have an Evo 3d cdma that was bricked with s-off.Under device manager the phone shows up as “QHSUSB_DLOAD”.There is no resurrection for this version. I am looking foe any advice on how to fix.

tatoapf · 05-24-2012, 17:15

Nothing new with the EVO 3D CDMA? I have the same problem

gg cell · 06-23-2012, 09:52

Riff jtag team please add HTC EVO 3D SPRINT PG86100 i need surely because i had a dead boot after downgrade , and hboot is S-OFF.... help me team, me and all my partner in my country need you...i think the boot is same with htc evo 3d cdma X-515D, and what the f

the boot is not same,so for riff team please add PG86100 for next update, be the first not only in the world but in the universe, thank rocker riff team

BABAK NURI · 06-23-2012, 13:07

Hi
Please Contact Mr.Legija at Monday Via Sonork or ICQ....

http://forum.gsmhosting.com/vbb/f634...pport-1439312/

smarttimes · 08-26-2012, 04:46

Any news on it?
If you see instead of the regular led indicator a veeeery dimmed light there is a chance, just let me know

fastblazers · 09-15-2012, 11:42

can you tell us how to push the phone to hsusb qdloader mode??
better with picture i think,

thank you

05-07-2012, 15:12	#1 (permalink)
chavonbravo Freak Poster Join Date: Jan 2009 Posts: 256 Member: 952912 Status: Offline Thanks Meter: 142	HTC Evo 3D CDMA Version repair What is the process for an HTC device that doesn't have it's own dll?? I have an evo3d, cdma version, that I can successfully get into qhs_usb_dload mode via tp. The driver is enumerated as "Qualcomm HS-USB QDLoader 9008". Every time I try to read from device with emmc plugin, I just get this response: Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.32, JTAG Manager Version: 1.43 Selected Resurrector: [HTC Glacier via USB V1.0.4501.54909] Looking for the HS-USB QDLoader Interface...OK Open the HS-USB QDLoader Interface Port...OK Establish connection with the Device...ERROR ERROR: Qualcomm HS-USB Device does not respond. Device never reboots or does anything. Any suggestions or help? P.S. this is not a dead phone, it fully boots up and all. So emmc is not damaged at all.

05-10-2012, 03:08	#4 (permalink)
bobbygrain Junior Member Join Date: May 2012 Location: USA Age: 44 Posts: 9 Member: 1757176 Status: Offline Thanks Meter: 0	any luck I have A evo 3d cdma that needs fixed any one figure it out?

05-14-2012, 05:33	#7 (permalink)
bobbygrain Junior Member Join Date: May 2012 Location: USA Age: 44 Posts: 9 Member: 1757176 Status: Offline Thanks Meter: 0	Evo 3d cdma help I have an Evo 3d cdma that was bricked with s-off.Under device manager the phone shows up as “QHSUSB_DLOAD”.There is no resurrection for this version. I am looking foe any advice on how to fix.

06-23-2012, 09:52	#9 (permalink)
gg cell Junior Member Join Date: Jun 2012 Location: malang east java Posts: 19 Member: 1775757 Status: Offline Thanks Meter: 14	HTC EVO 3D sprint PG86100 Riff jtag team please add HTC EVO 3D SPRINT PG86100 i need surely because i had a dead boot after downgrade , and hboot is S-OFF.... help me team, me and all my partner in my country need you...i think the boot is same with htc evo 3d cdma X-515D, and what the f the boot is not same,so for riff team please add PG86100 for next update, be the first not only in the world but in the universe, thank rocker riff team

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
How unlock new nokia5110 version 5.20 ?	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	01-21-2011 07:45
5110 version 5.24 solution	lampin	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	11-14-1999 07:00
New 8810 SW version	YaKuMo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	10-05-1999 11:22
How unlock Nokia version 5.20	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	07-17-1999 17:35

05-07-2012, 15:18	#2 (permalink)
chavonbravo Freak Poster Join Date: Jan 2009 Posts: 256 Member: 952912 Status: Offline Thanks Meter: 142	Actually, that's what I get when I try second time. First time I boot up phone when I try, I get: Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.32, JTAG Manager Version: 1.43 Selected Resurrector: [HTC Glacier via USB V1.0.4501.54909] Looking for the HS-USB QDLoader Interface...OK Open the HS-USB QDLoader Interface Port...OK Establish connection with the Device...OK Uploading resurrector data into memory...ERROR ERROR: Wrong response from the Qualcomm HS-USB Device.

05-07-2012, 16:22	#3 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, You should contact me via Sonork.

05-10-2012, 19:19	#5 (permalink)
chavonbravo Freak Poster Join Date: Jan 2009 Posts: 256 Member: 952912 Status: Offline Thanks Meter: 142	legija, I have gotten analyze jtag chain to output something twice, still trying to figure out jtag pads.

05-12-2012, 04:08	#6 (permalink)
bobbygrain Junior Member Join Date: May 2012 Location: USA Age: 44 Posts: 9 Member: 1757176 Status: Offline Thanks Meter: 0	Hello I am new to riff box but I have an evo 3d cdma that I need to fix.Any thing I can do to help??

05-24-2012, 17:15	#8 (permalink)
tatoapf Freak Poster Join Date: Nov 2005 Location: Miami,FL Posts: 460 Member: 197641 Status: Offline Thanks Meter: 60	Nothing new with the EVO 3D CDMA? I have the same problem

06-23-2012, 13:07	#10 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi Please Contact Mr.Legija at Monday Via Sonork or ICQ.... http://forum.gsmhosting.com/vbb/f634...pport-1439312/

08-26-2012, 04:46	#11 (permalink)
smarttimes Freak Poster Join Date: Jun 2012 Posts: 109 Member: 1772418 Status: Offline Thanks Meter: 7	Any news on it? If you see instead of the regular led indicator a veeeery dimmed light there is a chance, just let me know

09-15-2012, 11:42	#12 (permalink)
fastblazers Junior Member Join Date: Jun 2011 Posts: 17 Member: 1600188 Status: Offline Thanks Meter: 1	can you tell us how to push the phone to hsusb qdloader mode?? better with picture i think, thank you