htc glacier resurrection error

[sidramobilecare]

htc 4g mytouch glacier hangs on logo, dead while writing custom file

shows following error on resurrection

analyse jtag chain

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [HTC Glacier V1.0.0.0]

Connecting to the target...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x17B360E1, IR Length = 0x05 bits
Total IR length: 0x0005 bits

Analizing IDCODE(s) of the JTAG scan chain:
1. 0x17B360E1: Qualcomm MSM8255, H/W Rev. #1
2. 0x17B360E1: Qualcomm MSM8255T, H/W Rev. #1
3. 0x17B360E1: Qualcomm MDM6600, H/W Rev. #1

resurrection

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [HTC Glacier V1.0.0.0]

Connecting to the dead body...OK
Detected dead body ID: 0x17B360E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (M4G2DE, 0x000086800000 Bytes = 2.10 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (M4G2DE, 0x000000080000 Bytes = 0.50 MB)

Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x000005340800

how to recover please