HTC Mozart - Problem during resurection

[mefistofilos]

Hi,

I've got some problem with HTC Mozart. I don't know history of the phone...
At the moment I can go to bootloader but can't flash it using RUU or special USB cable via bootloader.

Here is the log from RIFF :

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC Mozart V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 3.02V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x66BC (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 4KB

Flashing the dead body...FAILED
WARNING: Programming Error (0x24) at 0x00001FE00000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FE10000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FE20000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FE30000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x00001FE40000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FE50000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FE60000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FE70000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x00001FE80000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FE90000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FEA0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FEB0000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x00001FEC0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FED0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FEE0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FEF0000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x00001FF00000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FF10000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FF20000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FF30000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x00001FF40000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FF50000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FF60000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FF70000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x00001FF80000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FF90000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FFA0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FFB0000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x00001FFC0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FFD0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FFE0000 is handled as Cut Excess.
WARNING: Programming Error (0x25) at 0x00001FFF0000 is handled as Cut Excess.
ERROR: Resurrection is not Completed due to Error: 0x2800

Box service --> Advanced settings --> Ignor IDCODE - DONE! But still the same problem...


Do apologize for my english. Still getting better

[mefistofilos]

RIFF BOX Team? Can you help me?