HTC Nexus One Problem, Expert, please help.. - GSM-Forum

hape_tenso · 07-20-2012, 10:35

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC Nexus V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Read/Write memory failed during H/W Init.

Phone condition is dead (black lcd) with blink yellow and orange...

With power supply,
ampere meter is up to 2 strips ( as like mostly software fault),
but i failed to repair it.

With the log above, is the problem caused by hardware fault or still in software ?

Expert, please help me...
thanks a lot

**legija** · 07-20-2012, 11:14

RIFF JTAG Box FAQ - ERROR: Read/Write memory failed during H/W Init

BABAK NURI · 07-21-2012, 00:53

Hi
Can You Try Resurrect with only USB(No Battery,No Power Supply)
----

Also,Please Note...: HTC Nexus one and Desire Can't Turn On with Power-Supply(Only needed battery)

lorenzo roberto · 07-21-2012, 05:04

Quote:

Originally Posted by BABAK NURI

Hi
Can You Try Resurrect with only USB(No Battery,No Power Supply)
----

Also,Please Note...: HTC Nexus one and Desire Can't Turn On with Power-Supply(Only needed battery)

sir please guide me with my nexus one it was successfully repaired boot with riffbox i already tried to fastboot installed recovery-RA-passion-v2.2.1 and flash cyanogen mod thru recovery mode but nothing happens it only show four color stripe red,green,blue,gray with 3 skater android at bottom. its my first to work on this kind of phone.

07-20-2012, 10:35	#1 (permalink)
hape_tenso Freak Poster Join Date: Jan 2010 Location: Indonesia Posts: 174 Member: 1199611 Status: Offline Thanks Meter: 23	HTC Nexus One Problem, Expert, please help.. Code: Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.32, JTAG Manager Version: 1.43 Selected Resurrector: [HTC Nexus V1.00] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...FAILED ERROR: Read/Write memory failed during H/W Init. Phone condition is dead (black lcd) with blink yellow and orange... With power supply, ampere meter is up to 2 strips ( as like mostly software fault), but i failed to repair it. With the log above, is the problem caused by hardware fault or still in software ? Expert, please help me... thanks a lot

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-27-2015 11:57
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
Copy from one 6110 to another	Leif Nielsen	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-10-1999 22:36

07-20-2012, 11:14	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	RIFF JTAG Box FAQ - ERROR: Read/Write memory failed during H/W Init

07-21-2012, 00:53	#3 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi Can You Try Resurrect with only USB(No Battery,No Power Supply) ---- Also,Please Note...: HTC Nexus one and Desire Can't Turn On with Power-Supply(Only needed battery)