HTC ONE M7 boot repair problem - GSM-Forum

Denozaur · 12-24-2014, 15:31

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [HTC OneM7 (PN0710000) V1.0.4926.46931]

Connecting to the dead body...OK
Detected dead body ID: 0x207150E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x42): Communication is not established. Terminating.

I remove the battery

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [HTC OneM7 (PN0710000) V1.0.4926.46931]

Connecting to the dead body...OK
Detected dead body ID: 0x207150E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.

Malik_GSM · 12-24-2014, 15:59

u need to change frequancy
RTCK
100% ur problm will solve
so many time i have face this error in htc phone but done by this

iusalmprim · 12-25-2014, 16:23

if i need make s-of how make it with usb? How htc m7 put into QHSUSB mode?

Denozaur · 12-26-2014, 11:18

I checked all RTCK of speed too most (((I ask help with what there can be a problem?

I tried on other pc too error (42)

vasko_bojilov · 03-11-2015, 09:09

Quote:

Originally Posted by Denozaur

I checked all RTCK of speed too most (((I ask help with what there can be a problem?

I tried on other pc too error (42)

http://forum.gsmhosting.com/vbb/f634.../#post10917553

12-24-2014, 15:31	#1 (permalink)
Denozaur No Life Poster Join Date: Apr 2005 Age: 44 Posts: 681 Member: 136052 Status: Offline Thanks Meter: 75	HTC ONE M7 boot repair problem Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [HTC OneM7 (PN0710000) V1.0.4926.46931] Connecting to the dead body...OK Detected dead body ID: 0x207150E1 - CORRECT! Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Resurrection sequence started. Establish communication with the phone...FAILED ERROR(0x42): Communication is not established. Terminating. I remove the battery Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [HTC OneM7 (PN0710000) V1.0.4926.46931] Connecting to the dead body...OK Detected dead body ID: 0x207150E1 - CORRECT! Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...FAILED ERROR: No response from the RIFF Box. Last edited by Denozaur; 12-24-2014 at 15:37.

12-24-2014, 15:59	#2 (permalink)
Malik_GSM No Life Poster Join Date: Mar 2013 Location: pakistan Age: 34 Posts: 842 Member: 1899191 Status: Offline Sonork: 100.1625109 Thanks Meter: 136	u need to change frequancy RTCK 100% ur problm will solve so many time i have face this error in htc phone but done by this

12-25-2014, 16:23	#3 (permalink)
iusalmprim Freak Poster Join Date: Mar 2007 Location: MOLDOVA Posts: 136 Member: 463189 Status: Offline Thanks Meter: 10	if i need make s-of how make it with usb? How htc m7 put into QHSUSB mode?

12-26-2014, 11:18	#4 (permalink)
Denozaur No Life Poster Join Date: Apr 2005 Age: 44 Posts: 681 Member: 136052 Status: Offline Thanks Meter: 75	I checked all RTCK of speed too most (((I ask help with what there can be a problem? I tried on other pc too error (42)