htc one m7 Error Code = 0x28 help - GSM-Forum

MATELECOM1 · 04-20-2015, 16:46

hi i won to reaper my htc one m7 all pin out is correct

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [HTC OneM7 (PN0710000) V1.0.4926.46931]

Connecting to the dead body...OK
Detected dead body ID: 0x207150E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0100 (SEM32G, 0x000747C00000 Bytes = 29.12 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0100 (SEM32G, 0x000000400000 Bytes = 4.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 29.12GB

Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x28 (0x000000). Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x000000000000

Panpanas · 04-20-2015, 18:38

@ MATELECOM1
RIFF JTAG Box FAQ - ERROR: Read Failed with Error Code: 0x28

04-20-2015, 16:46	#1 (permalink)
MATELECOM1 Cheater -Don't Deal with him- Join Date: Dec 2011 Location: APPEL Posts: 1,914 Member: 1707492 Status: Offline Thanks Meter: 606	htc one m7 Error Code = 0x28 help hi i won to reaper my htc one m7 all pin out is correct Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [HTC OneM7 (PN0710000) V1.0.4926.46931] Connecting to the dead body...OK Detected dead body ID: 0x207150E1 - CORRECT! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0100 (SEM32G, 0x000747C00000 Bytes = 29.12 GB) Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0100 (SEM32G, 0x000000400000 Bytes = 4.00 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 29.12GB Flashing the dead body... ERROR: DCC Loader has reported Error Code = 0x28 (0x000000). Trying to recover...FAILED ERROR: Failed due to multiple communication errors. Terminating at 0x000000000000

04-20-2015, 18:38	#2 (permalink)
Panpanas Freak Poster Join Date: Jul 2013 Location: Greek Posts: 139 Member: 1977258 Status: Offline Thanks Meter: 16	@ MATELECOM1 RIFF JTAG Box FAQ - ERROR: Read Failed with Error Code: 0x28