HTC ONE MAX(NM80P3P700) unbrick

[aman_aks87]

htc one max
sorry my bad english

when i am connect in pc then "android 1.0" device detect.
when i am use adb command then also detect ..

fastboot getvar all
===========================================
C:\Users\AMAN\Desktop\Android sdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.5555
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: 355*********** (hide by me)
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3524mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

all: Done!
finished. total time: 0.051s
=================================================

after that i am jtag using RIFF BOX
=================================================
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [HTC One Max (0P3P70000) V1.01 by <legija>]

Connecting to the dead body...OK
Detected dead body ID: 0x207150E1
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0100 (SEM32G, 0x000747C00000 Bytes = 29.12 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0100 (SEM32G, 0x000000400000 Bytes = 4.00 MB)

Flashing the dead body...OK
Resurrection complete!
================================================== ====================
after that phone not be POWER ON and also not go to bootloader..
and when connect to pc then also detect as like previous condition...

then after i am inject stock rom file data

android-info.txt

""modelid: 0P3P70000 cidnum: SPCS_001 mainver: 1.14.651.1 btype:1 aareport:1 hbootpreupdate:12 DelCache:1 ""

in this folder i am inject some file via emmc plugin using "htc 2nd gen partition name"

sbl1
sbl2
sbl3
hboot
boot
tz
pgfs
splash1
recovery
rpm

after that my phone go to ""Qualcomm HS-USB QDLoader 9008""

plz help
how to alive ??

[aman_aks87]

sucessfully repair via "Riff Box Remote Helper" thanks "legija sir"

he is says IMEI erased so not be go to bootloader.
after repair IMEI, bootloader working...

[arkun20]

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [HTC One Max (0P3P70000) V1.02 by <legija>]

Connecting to the dead body...OK
Detected dead body ID: 0x207150E1
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0100 (SEM16G, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0100 (SEM16G, 0x000000400000 Bytes = 4.00 MB)

Flashing the dead body...ERROR
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000009107200