Htc sensation 4g PG58100

[atv]

hi i just worked in a pg58100, but after assembly nothing, no boot, no charge, just black screen, as it came
i marked all options in resurection
cid, htc part.., hboot, etc
[11/24/2012 9:21:19 PM] [START OPERATION_ID = RESURRECT]
[11/24/2012 9:21:23 PM] Open serial port...OK
[11/24/2012 9:21:23 PM] Connecting to the RIFF Box...OK
[11/24/2012 9:21:23 PM] Firmware Version: 1.33, JTAG Manager Version: 1.44
[11/24/2012 9:21:23 PM] Selected Resurrector: [HTC Sensation4G (PG5810000) V1.0.4557.1904]
[11/24/2012 9:21:23 PM]
[11/24/2012 9:21:23 PM] Connecting to the dead body...FAILED
[11/24/2012 9:21:23 PM] None is detected.
[11/24/2012 9:21:23 PM] [FINISH OPERATION_ID = RESURRECT]

[11/24/2012 9:21:25 PM] [START OPERATION_ID = RESURRECT]
[11/24/2012 9:21:27 PM] Open serial port...OK
[11/24/2012 9:21:27 PM] Connecting to the RIFF Box...OK
[11/24/2012 9:21:27 PM] Firmware Version: 1.33, JTAG Manager Version: 1.44
[11/24/2012 9:21:27 PM] Selected Resurrector: [HTC Sensation4G (PG5810000) V1.0.4557.1904]
[11/24/2012 9:21:27 PM]
[11/24/2012 9:21:27 PM] Connecting to the dead body...ERROR
[11/24/2012 9:21:27 PM] ERROR: The RTCK Signal does not respond.
[11/24/2012 9:21:27 PM] [FINISH OPERATION_ID = RESURRECT]

[11/24/2012 9:22:14 PM] [START OPERATION_ID = RESURRECT]
[11/24/2012 9:28:10 PM] Open serial port...OK
[11/24/2012 9:28:10 PM] Connecting to the RIFF Box...OK
[11/24/2012 9:28:10 PM] Firmware Version: 1.33, JTAG Manager Version: 1.44
[11/24/2012 9:28:10 PM] Selected Resurrector: [HTC Sensation4G (PG5810000) V1.0.4557.1904]
[11/24/2012 9:28:10 PM]
[11/24/2012 9:28:10 PM] Connecting to the dead body...OK
[11/24/2012 9:28:10 PM] Detected dead body ID: 0x104210E1 - CORRECT!
[11/24/2012 9:28:10 PM] Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
[11/24/2012 9:28:10 PM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[11/24/2012 9:28:10 PM]
[11/24/2012 9:28:10 PM] Resurrection sequence started.
[11/24/2012 9:28:10 PM] Establish communication with the phone...OK
[11/24/2012 9:28:10 PM] Initializing internal hardware configuration...OK
[11/24/2012 9:28:10 PM] Uploading resurrector data into memory...OK
[11/24/2012 9:28:10 PM] Starting communication with resurrector...OK
[11/24/2012 9:28:10 PM]
[11/24/2012 9:28:10 PM] Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (MLL00M, 0x000090000000 Bytes = 2.25 GB)
[11/24/2012 9:28:10 PM] Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (MLL00M, 0x000000080000 Bytes = 0.50 MB)
[11/24/2012 9:28:10 PM]
[11/24/2012 9:28:10 PM] Flashing the dead body...OK
[11/24/2012 9:28:10 PM] Resurrection complete!
[11/24/2012 9:28:10 PM] [FINISH OPERATION_ID = RESURRECT]

[legija]

Hi,
Any idea how phone died in first place? Just in case that there is some bug in dll, please contact me tomorrow via Sonork.

[atv]

thanks for your attention,
the phone looks in good condition, no water or physical damage, never opened, customer says the owner bricked by wrong software, but who knows?
let me open a sonork account and try to reach you.
atv

[legija]

Hi,
Sonork doesnt work at the moment, so please use ICQ to contact me.
ICQ#: 299-912-089

Nick Name: legija

[atv]

thanks, already tried but i always find you offline at icq, but maybe its because i'm in gmt-6, could you tell me how to know if its the dll, use other, or how to know if its hardware
atv