HTC SENSATION[Pending] & Incredible S [Solved] - GSM-Forum

hassan1975 · 03-15-2012, 20:05

hello

i have HTC SENSATION & Incredible S

dead boot

i make gtaj and it write very good

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.31, JTAG Manager Version: 1.41
Selected Resurrector: [HTC Incredible S V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x17B360E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x00008B000000 Bytes = 2.17 GB)

Flashing the dead body...OK
Resurrection complete!

THE Incredible S JUST vibrator

and SENSATION nothing do it
but the phons not work

any idea

B.R.

Unlock_Master · 03-17-2012, 01:25

you will need to flash the handset

hassan1975 · 03-17-2012, 15:14

Quote:

Originally Posted by mrkhanz

you will need to flash the handset

the phone is dead boot

B.R.

hassan1975 · 03-17-2012, 16:45

where is supporter

no body answer ?

B.R.

..::ApexComm::.. · 03-17-2012, 18:58

just redownload the dlls of both models as there is a bug fix update today

it works for me and hopefully will work with u as well

Qaiser

hassan1975 · 03-17-2012, 19:59

i make that

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.31, JTAG Manager Version: 1.41
Selected Resurrector: [HTC Sensation (PG58130) V1.0.4459.7535]

Connecting to the dead body...OK
Detected dead body ID: 0x104210E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (MLL00M, 0x000090000000 Bytes = 2.25 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (MLL00M, 0x000000080000 Bytes = 0.50 MB)

Flashing the dead body...OK
Resurrection complete!

but its same
not work

alkhaleejmobile · 03-17-2012, 20:13

we are not happy from supporter ,why they did not help,us

hassan1975 · 03-17-2012, 20:41

and this for HTC Incredible S

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.31, JTAG Manager Version: 1.41
Selected Resurrector: [HTC Incredible S V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x17B360E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x00008B000000 Bytes = 2.17 GB)

Flashing the dead body...OK
Resurrection complete!

but stell no boot

hassan1975 · 03-19-2012, 14:00

no answer

i think the dll for Incredible S and Sensation (PG58130) is bad

B.R.

**legija** · 03-19-2012, 14:08

Can You be SO NICE and provide information about each phone history ?

How it got dead, what You've done with it etc ?

hassan1975 · 03-19-2012, 18:32

Incredible S dead by softwer with me

pdarepare · 03-20-2012, 14:45

How to read full backup? MCU - error.
ROM1?

**legija** · 03-20-2012, 15:11

Quote:

Originally Posted by hassan1975

Incredible S dead by softwer with me

Can You please check exactly what is written on back sticker on Your Incredible S ?

There is 3 versions of this model, maybe this is the problem.

hassan1975 · 03-21-2012, 13:22

Quote:

Originally Posted by legija

Can You please check exactly what is written on back sticker on Your Incredible S ?

There is 3 versions of this model, maybe this is the problem.

Model : PG32130

thx 4 u

B.R.

**legija** · 03-21-2012, 13:58

Quote:

Originally Posted by hassan1975

Model : PG32130

thx 4 u

B.R.

OK, so thats the exact version which is supported.

Please confirm - have You included also HTC partition and IMEI repair when repairing this Incredible S ?
If Yes - that could be some HW related problem then.

03-15-2012, 20:05	#1 (permalink)
hassan1975 No Life Poster Join Date: May 2003 Age: 38 Posts: 1,250 Member: 28819 Status: Offline Thanks: 38 Thanked 216 Times in 66 Posts	HTC SENSATION[Pending] & Incredible S [Solved] hello i have HTC SENSATION & Incredible S dead boot i make gtaj and it write very good Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.31, JTAG Manager Version: 1.41 Selected Resurrector: [HTC Incredible S V1.00] Connecting to the dead body...OK Detected dead body ID: 0x17B360E1 - CORRECT! Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x00008B000000 Bytes = 2.17 GB) Flashing the dead body...OK Resurrection complete! THE Incredible S JUST vibrator and SENSATION nothing do it but the phons not work any idea B.R.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Phone Stuff for FREE & KEy-GEn For Logo Editor !	BoNtEk - ThA WtC MeMbA	Nokia Multimedia	10	03-11-2013 15:27
Upload & Download Eprom	Lousangeles	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	8	09-16-2011 13:43
SIM restriction pending -- what does it mean?	Ryu	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	7	07-17-2011 10:05
About 5110 & Winlock	GByte9	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	2	11-08-1999 02:54
Nokia 5110 & 6110 Schemics	MyKy	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	2	08-06-1999 08:36

03-17-2012, 01:25	#2 (permalink)
Unlock_Master Freak Poster Join Date: Aug 2010 Location: UK Posts: 216 Member: 1379587 Status: Offline Sonork: 100.1619552 Thanks: 18 Thanked 22 Times in 13 Posts	you will need to flash the handset

03-17-2012, 16:45	#4 (permalink)
hassan1975 No Life Poster Join Date: May 2003 Age: 38 Posts: 1,250 Member: 28819 Status: Offline Thanks: 38 Thanked 216 Times in 66 Posts	where is supporter no body answer ? B.R.

03-17-2012, 18:58	#5 (permalink)
..::ApexComm::.. Freak Poster Join Date: Oct 2004 Location: 03453007200 Posts: 452 Member: 86994 Status: Offline Sonork: 100.1584487 Thanks: 217 Thanked 121 Times in 75 Posts	just redownload the dlls of both models as there is a bug fix update today it works for me and hopefully will work with u as well Qaiser

03-17-2012, 19:59	#6 (permalink)
hassan1975 No Life Poster Join Date: May 2003 Age: 38 Posts: 1,250 Member: 28819 Status: Offline Thanks: 38 Thanked 216 Times in 66 Posts	i make that Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.31, JTAG Manager Version: 1.41 Selected Resurrector: [HTC Sensation (PG58130) V1.0.4459.7535] Connecting to the dead body...OK Detected dead body ID: 0x104210E1 - CORRECT! Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (MLL00M, 0x000090000000 Bytes = 2.25 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (MLL00M, 0x000000080000 Bytes = 0.50 MB) Flashing the dead body...OK Resurrection complete! but its same not work

03-17-2012, 20:13	#7 (permalink)
alkhaleejmobile No Life Poster Join Date: Nov 2008 Location: saudi arabia Posts: 2,933 Member: 904809 Status: Offline Sonork: 100.1615464 Thanks: 89 Thanked 598 Times in 392 Posts	we are not happy from supporter ,why they did not help,us

03-17-2012, 20:41	#8 (permalink)
hassan1975 No Life Poster Join Date: May 2003 Age: 38 Posts: 1,250 Member: 28819 Status: Offline Thanks: 38 Thanked 216 Times in 66 Posts	and this for HTC Incredible S Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.31, JTAG Manager Version: 1.41 Selected Resurrector: [HTC Incredible S V1.00] Connecting to the dead body...OK Detected dead body ID: 0x17B360E1 - CORRECT! Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x00008B000000 Bytes = 2.17 GB) Flashing the dead body...OK Resurrection complete! but stell no boot

03-19-2012, 14:00	#9 (permalink)
hassan1975 No Life Poster Join Date: May 2003 Age: 38 Posts: 1,250 Member: 28819 Status: Offline Thanks: 38 Thanked 216 Times in 66 Posts	no answer i think the dll for Incredible S and Sensation (PG58130) is bad B.R.

03-19-2012, 14:08	#10 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 44 Posts: 4,595 Member: 256342 Status: Offline Sonork: 100.45940 Thanks: 130 Thanked 24,229 Times in 1,970 Posts	Can You be SO NICE and provide information about each phone history ? How it got dead, what You've done with it etc ?

03-19-2012, 18:32	#11 (permalink)
hassan1975 No Life Poster Join Date: May 2003 Age: 38 Posts: 1,250 Member: 28819 Status: Offline Thanks: 38 Thanked 216 Times in 66 Posts	Incredible S dead by softwer with me

03-20-2012, 14:45	#12 (permalink)
pdarepare Junior Member Join Date: Mar 2010 Posts: 15 Member: 1262996 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	How to read full backup? MCU - error. ROM1?