htc sentation pg58130 not power on repair with err and always dead - GSM-Forum

mscomp · 03-13-2013, 18:36

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [HTC Sensation (PG5813000) V1.0.4557.1879]

Connecting to the dead body...OK
Detected dead body ID: 0x104210E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0090/0x004A (HYNIX, 0x000090000000 Bytes = 2.25 GB)

Flashing the dead body...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK

umarmsn · 03-13-2013, 18:48

Quote:

Originally Posted by mscomp

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [HTC Sensation (PG5813000) V1.0.4557.1879]

Connecting to the dead body...OK
Detected dead body ID: 0x104210E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0090/0x004A (HYNIX, 0x000090000000 Bytes = 2.25 GB)

Flashing the dead body...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK

select sensation then do resurrection if it is done it is hw problem

mscomp · 03-13-2013, 18:53

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [HTC Sensation (PG5813000) V1.0.4557.1879]

Connecting to the dead body...OK
Detected dead body ID: 0x104210E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0090/0x004A (HYNIX, 0x000090000000 Bytes = 2.25 GB)

Flashing the dead body...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
Resurrection complete!

umarmsn · 03-13-2013, 18:58

Quote:

Originally Posted by mscomp

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [HTC Sensation (PG5813000) V1.0.4557.1879]

Connecting to the dead body...OK
Detected dead body ID: 0x104210E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0090/0x004A (HYNIX, 0x000090000000 Bytes = 2.25 GB)

Flashing the dead body...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
Resurrection complete!

use battary with usb then try & post

mscomp · 03-14-2013, 09:19

same done with ereur but cant entre flash mode

03-13-2013, 18:36	#1 (permalink)
mscomp No Life Poster Join Date: Apr 2006 Location: Oued zenati Algeria Age: 44 Posts: 1,215 Member: 266158 Status: Offline Sonork: 131654654654 Thanks Meter: 198	htc sentation pg58130 not power on repair with err and always dead Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [HTC Sensation (PG5813000) V1.0.4557.1879] Connecting to the dead body...OK Detected dead body ID: 0x104210E1 - CORRECT! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0090/0x004A (HYNIX, 0x000090000000 Bytes = 2.25 GB) Flashing the dead body...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK

03-13-2013, 18:53	#3 (permalink)
mscomp No Life Poster Join Date: Apr 2006 Location: Oued zenati Algeria Age: 44 Posts: 1,215 Member: 266158 Status: Offline Sonork: 131654654654 Thanks Meter: 198	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [HTC Sensation (PG5813000) V1.0.4557.1879] Connecting to the dead body...OK Detected dead body ID: 0x104210E1 - CORRECT! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0090/0x004A (HYNIX, 0x000090000000 Bytes = 2.25 GB) Flashing the dead body...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK Resurrection complete!

03-14-2013, 09:19	#5 (permalink)
mscomp No Life Poster Join Date: Apr 2006 Location: Oued zenati Algeria Age: 44 Posts: 1,215 Member: 266158 Status: Offline Sonork: 131654654654 Thanks Meter: 198	same done with ereur but cant entre flash mode