htc tattoo unbricked but... - GSM-Forum

gsmsikar · 04-10-2012, 04:56

i have a dead htc tattoo which i resurrected with RIFF and now it can enter into boot mode , but i donno how to proceed further to make the set working ..
what should i do now ?

how should i flash this set with this file ?

Code:

http://rapidshare.com/files/292517090/RUU_Click_HTC_WWE_1.67.405.6_WWE_release_signed_NoDriver.exe

or

should i use this 94mb full flash backup available at riff torrent site ..

Code:

HTC Tattoo/tattoo_htc_0x00000000_0x20000000.rar    94.15 MB

will this full flash backup make my set working or i will have to do something else too ?

i get this thread from XDA but it is a lengthy process , should i have to do this ?

Code:

http://forum.xda-developers.com/showpost.php?p=5179788&postcount=1

please help me ...

BABAK NURI · 04-10-2012, 07:28

Hi
Only you need reflash phone by RUU

Quote:

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

Also need repair cid or change to (11111111) If have "Error Coustom ID" when flashing

Quote:

As well, you can change CID - for this make sure ‘Repair Custom ID’ field is checked in the Resurrection Guide dialog.

If You Have any other problem after flashing RUU,you can write working full dump

04-10-2012, 04:56	#1 (permalink)
gsmsikar No Life Poster Join Date: May 2003 Posts: 4,780 Member: 28004 Status: Offline Sonork: 100.1601142 Thanks: 1,110 Thanked 690 Times in 370 Posts	htc tattoo unbricked but... i have a dead htc tattoo which i resurrected with RIFF and now it can enter into boot mode , but i donno how to proceed further to make the set working .. what should i do now ? how should i flash this set with this file ? Code: http://rapidshare.com/files/292517090/RUU_Click_HTC_WWE_1.67.405.6_WWE_release_signed_NoDriver.exe or should i use this 94mb full flash backup available at riff torrent site .. Code: HTC Tattoo/tattoo_htc_0x00000000_0x20000000.rar 94.15 MB will this full flash backup make my set working or i will have to do something else too ? i get this thread from XDA but it is a lengthy process , should i have to do this ? Code: http://forum.xda-developers.com/showpost.php?p=5179788&postcount=1 please help me ...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Thanx, but it doesn't work	1aitunon	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	5	06-17-2001 10:16
Unlocked network on 5110v5.28 does not make calls, but other network does?	Prodigal	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	03-01-2001 15:43
NOKIA 5110 5.29 all locks OPEN but SIM CARD NOT ACCEPTED	elektron code ECS	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	01-10-2001 16:40
FBUS works but MBUS not! PLS Help!	Upo	Nokia Hardware & Hardware-Repair Area	5	09-12-2000 14:54
6110 unlocked but wont give reception	KingOfKingston	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	04-10-2000 22:15